Holley EFI Components - Engine Builder Magazine

Holley EFI Components

Holley has announced the release of a large and varied assortment of new EFI components – High Flow Dual Port Boost Control Kits, Current Transducers, EV6 Unterminated Injector Harnesses, Unterminated Flying Lead Main Harnesses, and 1/8-NPT Sensor Blocks.

Holley has announced the release of a large and varied assortment of new EFI components – High Flow Dual Port Boost Control Kits, Current Transducers, EV6 Unterminated Injector Harnesses, Unterminated Flying Lead Main Harnesses, and 1/8-NPT Sensor Blocks.

HIGH-FLOW DUAL-PORT BOOST CONTROL KITS
Holley EFI High Flow Dual Port Boost Control Kits flow almost 40% more than comparable designs and up to 90% more than conventional three-port boost-control solenoids. Made of billet and anodized black, they feature built-in mounting provisions and pre-installed high-flow solenoids with a dual-O-ring sealing design that prevents boost leaks in the manifold. They come complete with two 1/4-inch push-lock fittings, two pre-terminated connectors, and extra pins that let you cut the harnesses to custom lengths.
CURRENT TRANSDUCERS
Holley EFI Current Transducers are a simple, efficient way to diagnose potential electrical-system issues with any component, including fuel pumps, alternators, electric water pumps, and inductive ignition coils. Available in two versions – one for a 30/350-amp dual range and one for a 50/200-amp dual range – they monitor both high- and low-amp current draw with a single sensor. They have built-in mounting tabs and come with connectors and pins that make it easy to mount them virtually anywhere and work with preconfigured sensor dropdowns in Holley EFI V5 software.

EV6 UNTERMINATED INJECTOR HARNESSES 
Holley EFI EV6 Unterminated Injector Harnesses are a fast, easy way to add EV6 injectors to 8-cylinder engines. Ideal for both new installations and for upgrading to a second set of EV6 injectors, they come complete with everything you need to build your own custom cut-to-fit EV6 injector harness: eight EV6 injector connectors with 36 inches of 20ga colored flying leads for each connector, 10 pins and seals, and a 10-pin Metri-Pack female connector and TPA to mate your Holley EFI Main Harness.

UNTERMINATED FLYING LEAD MAIN HARNESSES & J1A/J1B CONNECTOR KITS
Holley EFI Unterminated Flying Lead Main Harnesses are perfect for completely rewiring existing Holley EFI applications and for rewiring any new build right the first time. The kits include a 15-foot flying lead harness that allows you to easily customize your main harness installation, pre-terminated J1A and J1B Tyco Superseal connectors, and 60 crimped wires (fifty-seven 20 ga and three 18 ga). If you already have your own wire and just need the connectors and pins, Holley EFI J1A/J1B Connector Kits are the solution. They come with everything you need: a J1A ECU Connector, J1B ECU Connector, sixty 20-22 ga ECU pins, twenty 16-18 ga ECU pins, and thirty cavity plugs.

1/8-NPT SENSOR BLOCKS 

Holley EFI 1/8-NPT Sensor Blocks are ideal for remote-mounting multiple transducers, and they eliminate inaccuracies due to vibration and heat. Made of billet aluminum and compatible with all transducers with 1/8-NPT male threads and a 7/8-inch or smaller body/hex diameter, they feature four independent ports that each have three inlets/outlets.

For complete product details, click the following links:

•  High Flow Dual Port Boost Control Kits
•  Current Transducers (30/350 amp)
•  Current Transducers (20/200 amp)
•  EV6 Unterminated Injector Harnesses
•  Unterminated Flying Lead Main Harnesses
•  Sensor Blocks

You May Also Like

PBM Rotating Assemblies

Hundreds of stroke and bore combinations are available, including custom assemblies.

PBM Performance Products offers a wide range of rotating assemblies such as their Ultimate Billet Series, 4340 Ultralite, 4340 Superlites, and Standard Weight Forged Crankshafts. Hundreds of stroke and bore combinations are available.

Custom assemblies are a specialty. PBM rotating assemblies have a proven reputation of quality, durability and performance.

New Fuel Rail Products From Radium Engineering

Radium Engineering has released several new products over the last two months. Take a look below to see what’s new. All products are in stock and available for purchase right now.

Rottler’s EM45 CNC Machine

The EM45 features universal CNC technology designed for all engine shops and allows you to probe, surface and bore on the same machine.

Sunnen’s LBB-1660 Manual Hone

Sunnen’s LBB-1660 produces a round and straight honed bore, equal to or better than manufacturers’ new rods.

Reid Machine’s 392 Intake Roller Rocker Arms

These rocker arms come ready to handle just about any racing application.

Other Posts

Vortech Supercharged 572 cid Big Block Chevy Engine

When David Pearson of Little Evil Racing shows up at the track with his Pro 275 Foxbody Mustang, people fear him, and for good reason. David has set numerous 275 drag radial world records, and with a Vortech supercharged 572 cid big block Chevy in this Mustang, another record may fall!

Open Loop/Closed Loop and Learning

Closed-loop control can be programmed to either add or subtract up to a certain percentage of fuel in order for the engine to reach the target air/fuel ratio.

Oliver Racing Big Block Chevy Max-Plus Connecting Rods

These new rods are beefed up in all right places to tackle high-horsepower applications.

Reviewing Holley’s Terminator X EFI System

As part of our small block Ford build, we decided to use Holley’s Terminator X EFI system for plug and play Ford V8 engine control. Chris Wright of Pro Car Associates and Greg Jones of Engine Builder review all that the Terminator X offers and why Holley has been a leader in this product category.