Edelbrock 6.6L Duramax Diesel Cylinder Heads - Engine Builder Magazine

Edelbrock 6.6L Duramax Diesel Cylinder Heads

The all-new Edelbrock Cylinder Heads for 2001-2016 GM 6.6L Duramax Diesel V8 engines are made in the USA and are a direct bolt-on replacement for any street or off-road application where higher levels of performance and durability are desired.

Edelbrock has announced the availability of its new Diesel Cylinder Heads for the GM 6.6L Duramax engine. Edelbrock’s in-house team of cylinder head engineers not only managed to make a head with better flow than the factory Duramax head, but did so with a swirl ratio that delivers a complete and clean burn – two important factors in meeting the government’s stringent diesel emissions requirements.

The result is a high-performance cylinder head with increased potential when you want to turn up the boost because it is no longer the restriction in the system. These new Edelbrock Diesel Cylinder Heads are much more capable of flowing air while still providing correct combustion.

As a result of the successful introduction of the new high-performance Duramax Diesel head, Edelbrock enters 2019 with its first-ever product developed especially for the diesel engine market.

The all-new Edelbrock Cylinder Heads for 2001-2016 GM 6.6L Duramax Diesel V8 engines are made in the USA and are a direct bolt-on replacement for any street or off-road application where higher levels of performance and durability are desired.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.