NOS Supercharger Injector Plate Nitrous Systems - Engine Builder Magazine

NOS Supercharger Injector Plate Nitrous Systems

Holley has announced the release of NOS Supercharger Injector Plate Nitrous System​s. Compatible with both 6-71 and 8-71 Roots-style superchargers and available in black or silver, they provide 175 additional horsepower and can add up to extra 250 horsepower with the proper jetting.

Holley has announced the release of NOS Supercharger Injector Plate Nitrous System​s. Compatible with both 6-71 and 8-71 Roots-style superchargers and available in black or silver, they provide 175 additional horsepower and can add up to extra 250 horsepower with the proper jetting. They come with or without a 10-pound nitrous bottle and include everything you need in one comprehensive kit: a low-profile (1/2-inch) aluminum plate, hardline, nozzles, jets, studs, gaskets, a fuel block, and detailed, easy-to-follow step-by-step instructions.

NOS Supercharger Injector Plate Nitrous System​s inject nitrous into the engine at -127 degrees Fahrenheit, and as it mixes with the incoming air it lowers intake temperatures by as much as 75 degrees. This denser intake charge boosts both power and torque by up to 40 percent across the entire power band, and because the nitrous can be injected at lower rpm – before the engine reaches full boost – it eliminates lag time and delivers instantaneous power.

For more info:

•  Polished Supercharger Injector Plate Nitrous System
•  Black Supercharger Injector Plate Nitrous System
•  Polished Supercharger Injector Plate Nitrous System (with bottle)
•  Black Supercharger Injector Plate Nitrous System (with bottle)

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.