UEM Dualoy Diesel Pistons - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

UEM Dualoy Diesel Pistons

United Engine & Machine has launched its new Dualoy Diesel Pistons. Dualoy Diesel Pistons are made from two alloys, an aluminum casting with an iron top ring carrier bonded in. UEM’s design gives the top ring a much harder surface to operate on.

Engine Builder
By Engine Builder

United Engine & Machine has launched its new Dualoy Diesel Pistons. Dualoy Diesel Pistons are made from two alloys, an aluminum casting with an iron top ring carrier bonded in. Diesel engines are notorious for the extreme pressures exerted on the top ring, so UEM’s design gives the top ring a much harder surface to operate on.

Related Articles

Dualoy diesel pistons are cast and machined in-house to maintain the highest level of quality and consistency. They’re available for most popular diesel light and medium-duty truck applications. All Dualoy pistons feature a high strength top ring carrier to improve strength of the top land, and resistance to the extreme heat of diesel engines. Oil cooling galleries are cast into the pistons, as required depending on the specific application.

Applications are available for Cummins, Ford Power Stroke and GM Duramax.

For more information: www.UEMpistons.com

You May Also Like

Products

Waterman Racing Components High-Flow Canister-Style Fuel Filter

Waterman Racing Components, the premier manufacturer of racing fuel systems and accessories, has introduced its all-new High-Flow Canister-Style Fuel Filter to provide effective fuel filtration at 40 GPM with minimal pressure drop while minimizing its physical footprint. In-line fuel filters are effective, but as flow rates climb, filter length must increase, becoming a limiting factor.

Engine Builder
By Engine Builder

Waterman Racing Components, the premier manufacturer of racing fuel systems and accessories, has introduced its all-new High-Flow Canister-Style Fuel Filter to provide effective fuel filtration at 40 GPM with minimal pressure drop while minimizing its physical footprint.

In-line fuel filters are effective, but as flow rates climb, filter length must increase, becoming a limiting factor. This all-new canister-style filter provides maximum flow while minimizing size. While this filter was designed and engineered specifically to pair with Waterman Racing High-Flow Mechanical Fuel Pumps, it is purpose-built to allow extremely high flow rates with minimal pressure loss for any fuel system. The canister-style housing provides a vertical filter mount to ease mounting in tight engine bays while maintaining a large element surface area for extreme flow capability.

Read Full Article

More Products Posts
Manley Turbo Tuff Tri-Beam Rod For Lamborghini and Audi V10

Manley’s Turbo Tuff Tri-Beam rods are ideally suited to high-boost turbocharged and nitrous oxide assisted applications.

By Engine Builder
World Products Sportsman II Small Block Chevy Cylinder Heads

This high-performance cast-iron cylinder head has been continuously improved since its introduction over 20 years ago.

By Engine Builder
Erson Diesel Performance Valves

New valves from Erson Cams are designed for high performance diesel applications. Intake valves are made from 21-4N stainless alloy and exhaust valves are Inconel alloy with a stellite facing for maximum durability under the extreme heat and stress produced by turbocharged and supercharged diesel engines. Related Articles – Trend Performance H-Series Pushrods – CP-Carrillo

By Engine Builder
Trend Performance H-Series Pushrods

The new H-series pushrod solid design is available for all pushrod race engines operating under extreme stresses that do not oil the rocker balls through the pushrods.

By Engine Builder

Other Posts

Klotz COXOC Top-Treat Fuel Oxygenator

Klotz COXOC is a top-treat fuel oxygenator that improves engine performance, especially under low and mid-range rpm.

By Engine Builder
Proflow SuperMax+ Billet LS Intake Manifold

Billet CNC LS intake manifold kit, SuperMax Plus, for Holden Commodore LS3/L92. Features a 102mm bore in gloss black.

By Engine Builder
Tomei Forged Billet Crankshaft for Nissan VR Engine

Tomei’s forged, billet, five-counterweight crankshaft for the VR38DETT Nissan engine.

By Engine Builder
Expanded Inline Fuel Filter Offerings from System 1

System 1 Filtration Products offers a wide selection of inline fuel filters for competition and street applications. They range in size from the large diameter long filter at 9” x 2-1/2” to the compact “Pro Street” model that measures 4-1/2”in length by 2” diameter. All are CNC-machined from 6061-T6 aluminum billet at System 1’s Tulare,

By Engine Builder