MAHLE Motorsport 6.7L Cummins Diesel PowerPak Piston Kit - Engine Builder Magazine

MAHLE Motorsport 6.7L Cummins Diesel PowerPak Piston Kit

MAHLE Motorsport now offers an expanded line of Dodge Cummins diesel performance pistons with the addition of its 6.7L Diesel PowerPak Piston Kit (part #197850313).

MAHLE Motorsport now offers an expanded line of Dodge Cummins diesel performance pistons with the addition of its 6.7L Diesel PowerPak Piston Kit (part #197850313). This kit was developed for diesel drag race and pulling applications for the Dodge Cummins 6.7L.

Featuring MAHLE’s exclusive M142P alloy because of its high temperature and strength and low expansion characteristics, this PowerPak kit includes German steel pins and a stainless steel Nitride ring set – 1/16˝, 1/16˝ and 3/16˝. The pistons feature a hard anodized top ring groove for added durability and increased longevity, and GRAFAL® coating for reduced drag, scuffing friction and cylinder bore wear. For this kit, MAHLE also offers the choice of a thermal barrier crown coating.

The pistons are designed with a modified bowl that mimics the design used in industrial QSB applications. This design reduces erosion issues caused by high pressure, long duration or advanced injection timing. The pistons feature oversized valve pockets that are 0.200˝ deep allowing up to 1.500˝ intake and a 1.450˝ exhaust valve diameter.  Fully radiused valve pockets reduce stress and fatigue cracking. With a 2.722˝ compression height the pistons allow for 0.010˝ deck machining while retaining the stock piston protrusion.

For more information: www.mahlemotorsports.com or 888-255-1942.

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.