D-A Brad Penn Security Non Detergent Motor Oil - Engine Builder Magazine

D-A Brad Penn Security Non Detergent Motor Oil

D-A Brad Penn Security Non Detergent Motor Oil is an SAE 30, detergent and anti-wear free lubricating oil formulated with refined PennGrade base oil and anti-foam to minimize cavitation.

D-A Brad Penn Security Non Detergent Motor Oil is an SAE 30, detergent and anti-wear free lubricating oil formulated with refined PennGrade base oil and anti-foam to minimize cavitation. 

Because Brad Penn Security Non Detergent Motor Oil contains no additives, the PennGrade base oil will afford naturally good anti-wear characteristics making this oil suitable for use in applications such as gasoline-powered engines, air compressors and hydraulic applications, straight cut reduction gear applications, and others requiring an uninhibited, API Service SA fluid.

Category SA denotes service typical of older engines operated under such mild conditions that the protection afforded by compounded oils is not required. NOTE – Brad Penn Security Non Detergent Motor Oil is not fit for use in gasoline-fueled automotive engines manufactured after 1930.

The utilization of such in a modern day engine can result in unsatisfactory performance and significant engine component wear/damage. Customers with older, legacy engines and various applications able to utilize Brad Penn Security Non Detergent Motor Oil should always adhere to a more frequent, carefully selected drain interval. 

Quart size
D-A Part Number: 70306

You May Also Like

Haltech Nexus Rebel LS Gen 3 and Gen 4 ECU Kits

The Nexus Rebel LS ECUs are compatible with Haltech’s plug-and-play CAN accessories.

Haltech ECU

The Haltech Nexus Rebel LS Gen 3 and Gen 4 ECU Kits make getting an LS engine up and running easier. Designed for Gen III and Gen IV engines with a T-56 manual transmission, the all-in-one design has every component required to install, start, and run the engine. It combines engine management, wideband O2 controller,  data logger, and a Wi-Fi module in a single unit. 

Graymills Benchtop Ultrasonic Cleaners

These machines feature a self-enclosed design with stainless steel, corrosion-resistant tanks and lift-off covers.

Graymills ultrasonic cleaner
AMSOIL 0W-8 100% Synthetic Hybrid Motor Oil

This new 0W-8 viscosity is engineered for applications calling for the JASO GLV-1 specification.

AMSOIL hybrid oil
Crower EnduraMax Roller Lifters

Available in all popular sizes and comes standard with Crower’s High Pressure Pin Oiling to help keep the roller and shaft lubricated.

Crower roller lifter
Point One Chevy Oil Pump Stud Kit

Point One manufactures high-strength critical engine fasteners for aftermarket automotive, racing, and other demanding applications.

P1 Chevy oil stud kit
Other Posts
Nissan SR20 DET Engine

We described DRZA Auto as a JDM and Nissan playground, and upon our visit, it didn’t disappoint. One of the builds owners Derek and Rita Cho-Sam had just finished was a Nissan SR20 DET engine. Check it out!

Nissan SR20 DET engine
Turbocharged Nissan SR20 DET Engine

For a number of years now, Derek and Rita Cho-Sam of DRZA Auto in Tavares, FL have been among our top Nissan engine shops. When we realized that Sick Week would be rolling through their part of Florida, we made arrangements to stop by and see DRZA in person. Derek and Rita gave us a

Nissan SR20 DET engine
Turbocharged 388 cid LS Engine

Kevin Smith and KSR Performance & Fabrication have been Sick Week staples. We caught up with him this year to get the details of his 1979 z28 Camaro named Soccer Mom and its brand-new turbocharged 388 cid LS engine built by Texas Speed. Check it out!

KSR LS engine
Kevin Smith’s Turbocharged 388 cid LS Engine

Kevin Smith, owner of KSR Performance & Fabrication, has been a big part of the drag and drive community for a while now. His shop, in addition to all the performance and fab work it regularly does, stays open during events like Sick Week, so competitors can utilize the lifts and tools to get back

KSR LS engine