OTC H-D Engine Service Tools for Detroit Diesel - Engine Builder Magazine

OTC H-D Engine Service Tools for Detroit Diesel

Designed with the technician in mind, the tools are made to help keep heavy-duty trucks on the road by making preventative maintenance, inspections and service easier and more efficient.

OTC has expanded its specialty tools catalog with new engine service tools for use on Detroit Diesel applications. Designed with the technician in mind, the tools are made to help keep heavy-duty trucks on the road by making preventative maintenance, inspections and service easier and more efficient. The new Detroit Diesel engine service tools from OTC are now available throughout North America and include:

Oil Priming Adapter (#6492-10) – The OTC Oil Priming Adapter allows for proper engine pre-lube to prevent dry starts following engine service. The adapter is designed for use with the 6492 Engine Oil Primer and installs into the oil priming port in the oil module on Detroit Diesel DD13 and DD15 engines.

Piston Ring Compressor (#4853) – The universal OTC Piston Ring Compressor assists technicians to compress piston rings during piston installation. The 4853 is equipped with an adjustable handle that provides an effective size range for rings from 2.125 to 5.0 inches in diameter. The compressor is applicable for all Detroit Diesel engines. 

Poppet Disassembly Tool (#5879) – The OTC Poppet Disassembly Tool aids in the disassembly of poppet valves with 2-sprong spanner style ends. The 5879 is designed for use on all Detroit Diesel engines.

Cylinder Liner Remover (#5875) – The OTC Cylinder Liner Remover expands in the cylinder to pull liners with an inner diameter of 5.0 to 5.75 inches. The 5875 uses thrust bearings on the expander along with bridge nuts for friction-free operation on Detroit Diesel Series 60 12.7L with EGR and MTU S2000 engines.

Cylinder Liner Installer (#5874) – The OTC Cylinder Liner Installer is designed to install cylinder liners into the engine block. The 5874 attaches to Detroit Diesel Series 60 engines with three cylinder head bolts, then the drive screw and plate force the cylinder liner into the correct position.

Compression Gauge (#5872) – The OTC Compression Gauge is designed to measure compression accurately and easily within Detroit Diesel Series 60 and two-cycle Series 53, Series 71, Series 92 and Series 149 engines. The heavy-duty compression gauge with push button release value and quick-connect coupler has a range of 0-1,150 PSI or 0-8,000 kPa. 

To learn more about OTC tools and equipment for Detroit Diesel engines, visit www.otctools.com.

You May Also Like

Hot Shot’s Secret Black Diamond Outlaw 10W-30 Synthetic Engine Oil

Formulated for extreme protection and high TBN levels, ideal for street or strip.

Hot Shot’s Secret, known for high-performance oils and additives, has expanded the Black Diamond Outlaw engine oil family to include a 10w-30 viscosity. The 100% full PAO synthetic-based engine oil contains extreme pressure additives, three times the amount of zinc of traditional CK-4 oils and antimony levels over 400 ppm for improved film strength and protection. 

Eneos Racing Street 0W-50 Motor Oil

These racing formulations are created using a history of OEM innovation in conjunction with racing partners around the world.

Dillon Manufacturing Carbinite Coating for Milling Performance

Dillon’s Carbinite coating is ideal for hard or soft jaws, especially Vise Jaws and Step Jaws used for clamping applications.

Summit Racing’s Speedmaster Top End Engine Kits

Kits include a pair of assembled aluminum cylinder heads, an intake manifold, aluminum roller rocker arms, cast aluminum valve covers, and gaskets.

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

Other Posts

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.