Video: Diesel of the Week – Super Stock Super B Cummins - Engine Builder Magazine

Video: Diesel of the Week – Super Stock Super B Cummins

Known as the Haisley Super B, this Haisley Machine 24-valve Cummins has a beefed up the block and quality components for big horsepower.

When Van Haisley ran across the problem of Cummins blocks splitting apart due to immense horsepower, he set out to make a better engine. Known as the Haisley Super B, Van beefed up the block using a deck plate and many other quality components. Find out what went into this Haisley Machine Cummins build!

Diesel of the Week is sponsored by AMSOIL. If you have an engine you would like to highlight in this series, please email Engine Builder magazine’s Editor, Greg Jones at [email protected]

You May Also Like

The Story of Callies Performance Products

We recently got access to go inside Callies Performance Products‘ Fostoria, OH facility and speak with owner Rick Norton and his son Heath Norton, up close and personal. What we got was the story of how Callies came to be a leading manufacturer of engine components, and where the company is going next.

We recently got access to go inside Callies Performance Products' Fostoria, OH facility and speak with owner Rick Norton and his son Heath Norton, up close and personal. What we got was the story of how Callies came to be a leading manufacturer of engine components, and where the company is going next.

Reviewing Cometic Gasket’s MLX Head Gaskets

We got a set of Cometic Gasket’s MLX head gaskets for a small block Ford build we’re doing. Our head gaskets are a standard layout Ford head gasket with a .040″-.044″ thickness and designed to fit a 4.125″ bore. The difference between an MLS and Cometic’s MLX gasket, which stands for Multi-Layer-Xtreme, is an extra

Dream Engine Giveaway Ep. 4 – Bottom End Assembly

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Related Articles – One-on-One with

How Heat Affects Clearances in a Block

Steve Morris Engines has a Lamborghini engine block in the shop and Steve demonstrates how heat can affect the clearances. Related Articles – Check Your Camshaft Ramp Rates – Colin Jost’s 521 cid Blown Big Block Chevy Engine – EB Takeover: Bullet Racing Engines

Doc Baker’s Supercharged 500 cid Billet Hemi Engine

Doc Baker is an engine builder and racer who does things his own way. We were excited to learn more about his 1971 Dodge Demon with a supercharged 500 cid billet Hemi engine in it, and caught up with Doc at the 2022 Builder’s Brawl race event at World Wide Technology Raceway. Check it out!

Other Posts

1,000 Horsepower LB7 Duramax Engine

Like many before him, Bryan Woitas got bit by the diesel bug after experimenting with some mild power-adders on his daily driver. Years later, he has a 1,000-horsepower LB7 Duramax to show off!

Dual Compound-Turbo 6.6L LBZ Duramax Engine

Not only does this 1954 Chevrolet 3100 house a hefty 6.6L LBZ Duramax engine, it boasts a quad-turbo setup and enough piping to blow your mind! Check it out!

2,200 Horsepower Compound Turbo 6.7L Cummins

Josh McCormack is no stranger to high-horsepower Cummins builds – this engine was built in-house at his shop Wide Open Throttle Motorsports and makes nearly 2,200 horsepower on nitrous. Check it out!

Ryan Milliken’s 6.8L Cummins-Powered ’69 Nova

Ryan Milliken’s ’69 Nova currently holds the X275 1/8th mile record at 183 mph, which was set last December at the Snowbird Outlaw Nationals. Under the hood is a beefy, Freedom Racing Engines-built 6.8L Cummins engine that makes around 3,100 horsepower. Check it out!