Moroso Dry Sump Pump, Five-Stage Fuel Pump Drive - Engine Builder Magazine

Moroso Dry Sump Pump, Five-Stage Fuel Pump Drive

The pump weighs almost half of gerotor pumps and takes up to 40% less power to drive.

Moroso has introduced Part No. 22367, a Tri-Lobe, Five-Stage Dry Sump Pump with a Fuel Pump Drive, and a Brinn/Bert bellhousing bracket.

The tri-lobe 1.700 scavenge sections featuring individual timing gears to ensure proper clearance at the highest of rpms. Pump has a 1.200 spur gear pressure section based off Moroso’s billet wet sump pump design.

The pump weighs almost half of gerotor pumps and takes up to 40% less power to drive. The pump has a pressure adjustment knob and is included with three different pressure range springs. It features a rear 3/8˝ hex fuel pump drive with 1:1 ratio that accepts the popular 1.450 ID, 3-bolt, fuel pump swivel clamps. Includes replaceable fittings: Pressure Section -12AN Inlet, -12AN Outlet, Scavenge Inlets -12AN Return -16AN. 

For more info: www.moroso.com

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

ProCharged 5.000” Bore Space Billet Big Block Chevy Engine

One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!

billet big block Chevy engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.