Engine of the Week is presented by
If you’ve ever built an engine for a desert or endurance racing application, then you know it comes with a much different set of parameters than most other engines. Mike Hupertz of Ison Racing Engines knows all about those challenges after building Justin Lofton’s RY45 Trophy Truck engine for the Baja 1000.
With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova.
With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova.
Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled. Related Articles – Jason Sack’s Cowboy Up Nova Gets Steve Morris Engine’s SML – Part 1 – A Better Way to Remove Valve Springs – Naturally Aspirated USAC Midget Honda
Jason Sack’s Cowboy Up Nova was already a formidable drag-and-drive streetcar capable of 200 mph 7-second quarter mile ETs and 2,200 horsepower. However, the quest for more power and performance is never done, and that’s where Steve Morris Engines comes in and the new SML engine platform. Watch as Steve readies an SML for Jason’s
Danny Soliz of Hill Country Performance & Machine has a lot of tricks up his sleeve to make engine work a little easier. He’s great at working smarter not harder, and in this latest video he shows you a great way to remove valve springs and keep some of those valvetrain components organized. Related Articles
We were recently in Danville, IN to visit 4 Piston Racing, a premier performance Honda engine shop, and co-owner Luke Wilson. During our visit, we got to see a ton of cool things in various stages of completion, but one of the standout builds was this naturally aspirated USAC Midget Honda engine that had just
With a storied race history of his own, Sandy Wilkins has taken his passion for cars and engines and turned it into his life. From race teams to Roush Yates Performance to opening Wilkins Racing Engines, he knows how to build high-horsepower engines like this 632 cubic inch big block Chevy nitrous engine for No Prep drag racing. Check it out!
Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!
Scat Enterprises will be moving headquarters from Redondo Beach, CA to Oxnard, CA by March 2024.
With a 40-year history in all sorts of racing, machining and engine building, Pro Motor Engines in Mooresville, NC can do just about anything in-house from NASCAR to drag racing and everything in between. Just check out this LS3-based TA2 spec engine!
