Goodson's 3-D Fast Cut Setting Micrometer - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

Goodson’s 3-D Fast Cut Setting Micrometer

The redesigned setting micrometer has a 0.800˝ to 3.000˝ range capacity and features a carbide tipped anvil for accuracy and durability.

Engine Builder
By Engine Builder
Published:

Goodson Tools & Supplies for Engine Builders has introduced a fully reengineered setting micrometer for the 3-D Fast Cut Valve Seat Cutting System. 

Related Articles

According to Dave Monyhan, Goodson National Sales Manager, “We lost our supplier for the original MGA-MIC back in 2019 and have been searching for a way to bring the tool back ever since. With some good old ingenuity, we found a way to do just that.” 

The redesigned setting micrometer has a 0.800˝ to 3.000˝ range capacity and features a carbide tipped anvil for accuracy and durability. Goodson also engineered in a .375˝ diameter precision drill bushing for the calibration standard or pilot to ride on. The direct reading micrometer is accurate to .001˝. According to Goodson Tech, Chris Jensen, “it has silky smooth micrometer action.” 

Use the 3-D Fast Cut Setting Micrometer with any .375˝ pilot, regardless of top size, to set your cutters. An optional 1˝ calibration standard is also available. 

For more information: 1-800-533-8010 or goodson.com. 

You May Also Like

Products

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

Modern high-performance engines need a bigger spark to make power. NGK's MOD Series Ignition Coils feature custom primary and secondary windings vacuum-sealed in epoxy resin to increase spark output. They also have high-temperature PET composite housings and high-temperature silicone COP boots so they won’t crap out under severe engine conditions. Pair your MOD Series coils with a set of NGK spark plugs and your ignition system is good to go.

Read Full Article

More Products Posts
LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

By Greg Jones
Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.

By Greg Jones
Hot Shot’s Secret Black Diamond Outlaw 10W-30 Synthetic Engine Oil

Formulated for extreme protection and high TBN levels, ideal for street or strip.

By Greg Jones
Eneos Racing Street 0W-50 Motor Oil

These racing formulations are created using a history of OEM innovation in conjunction with racing partners around the world.

By Greg Jones

Other Posts

Dillon Manufacturing Carbinite Coating for Milling Performance

Dillon’s Carbinite coating is ideal for hard or soft jaws, especially Vise Jaws and Step Jaws used for clamping applications.

By Greg Jones
Summit Racing’s Speedmaster Top End Engine Kits

Kits include a pair of assembled aluminum cylinder heads, an intake manifold, aluminum roller rocker arms, cast aluminum valve covers, and gaskets.

By Greg Jones
Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

By Greg Jones
Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

By Greg Jones