Fluidampr Performance Diesel Dampers For Duramax L5P - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

Fluidampr Performance Diesel Dampers For Duramax L5P

New Fluidampr Performance Diesel dampers for the Duramax L5P and High Strength Bolt Kit are available through quality parts distributors and professional engine builders.

Engine Builder
By Engine Builder

Fluidampr has announced the release of two new Duramax L5P performance diesel dampers. Part number 830141 fits 2017-2019 model years, $587 MSRP. Part number 830151 with dual pulley is for 2020-present model years, $714 MSRP. 

Related Articles

“We’re excited to bring you this new product release,” says project lead, Nick Orefice. “Fluidampr has extensive experience with the Duramax L5P engine. Variations of this damper have already seen widespread use by the United States military in their latest high performance light tactical vehicles. Now it’s ready for all out street performance and professional competition use.”

Both dampers are finished in a corrosion resistant black zinc chromate, then laser engraved with a timing mark, Fluidampr – Made in the USA logo, and SFI 18.1 credential. A pre-drilled 3/8”-24 UNF on 3.200 B.C. bolt pattern allows for an accessory pulley, custom mandrel drive, and damper installer/remover tool use. Duramax L5P damper 830151 for 2020-present models feature a hard coat anodized aluminum fan pulley in this mounting.

Fluidampr High Strength Bolt Kit, part number 300010 is recommended for proper installation in performance applications. The kit contains a diamond-plated friction washer and an ARP high strength bolt. Combined these help ensure a secure connection to the crankshaft and protects against fretting. New Fluidampr Performance Diesel dampers for the Duramax L5P and High Strength Bolt Kit are available through quality parts distributors and professional engine builders.

Benefits
Broad RPM range torsional vibration protection.
Reduce risk of crankshaft failure & wear on critical engine parts. 
Unleash lost torque and horsepower. 
Mandrel drive provision. 
Pre-drilled 3/8”-24 hole on Ø3.200” bolt circle. 
Removable hard coat anodized aluminum fan pulley (p/n 830151). 
SFI 18.1 certified and made in USA. 

For more information: (716) 592-1000 or www.fluidampr.com.

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

Warren Diesel Injection’s New 6.0L Powerstroke Race Engine

Jesse Warren and his team are synonymous with the Ford Powerstroke platform, specifically the 6.0L. As such, Jesse’s team at Warren Diesel Injection continues to push the envelope of the 6.0L Powerstroke and recently unveiled a new race truck at the 2023 Ultimate Callout Challenge. Find out what went into this 3-year-long build! Related Articles

By Greg Jones
Compound-Turbo “Shredder” 5.9L Cummins Engine

Like any sensible diesel guy, Chris Voorheis got a small taste of diesel performance and immediately wanted more. His 2006 Mega Cab went from a daily driver to a sled puller to now a formidable drag racing vehicle thanks to a compound-turbo “Shredder” 5.9L Cummins from Industrial Injection. Check out what went into the build!

By Evan Laux
Turbocharged 6.0L Powerstroke Engine

With a last name of Ford, it’s a good thing Dylan Ford of Abilene Diesel Performance is a Powerstroke guy. In fact, he’s found a true passion for 6.0L Powerstrokes and recently built a race truck with a turbocharged and nitrous-assisted 6.0L Powerstroke for drag racing. Check it out!

By Evan Laux
All About Those Valves

We recently sat down with Ryan Hamilton and Phil Data of SBI, as well as D&J Precision Machine owner Drew Pumphrey to talk about everything valves – problem areas, materials, sizes, angles, valve jobs, seats, and even springs. Check out this latest Intellectual Horsepower episode brought to you by SBI. Related Articles – Pat Musi

By Greg Jones