Ultrasonic Mobile Cleaning Units - Engine Builder Magazine

Ultrasonic Mobile Cleaning Units

Ultrasonic cleaning is extremely effective at removing dirt and grime from even the smallest of crevices

UltraSonic cleaning provides an effective alternative to tedious hand cleaning, especially in hard-to-reach spots.

UltraSonic cleaning machines are ideal for cleaning a wide variety of instruments and mechanical parts; engine and electrical components; jewelry; and other items. After use, you can expect your parts to return to an almost “like new” condition without damaging delicate parts or surfaces. It’s high-performance cleaning that cleans your parts faster and cheaper than the alternatives.

The new mobile units feature variable Ultrasonic power, digital controlled tank temperature, Ultrasonic timer, insulated tank, and an employee friendly work height.

The new Digital Pro Series Ultra 2100 and Ultra 3000 feature 20 gal and 25 gal tanks respectively.

For more info: https://ultrasonicllc.com/machines/mobile-machines

You May Also Like

Jesel Camshaft Belt Drive Systems

Built with the finest materials available, our Camshaft Belt Drives feature several performance and valve train stability enhancements over traditional timing chains and gear drives. The Gates patented High Torq Drive™ reinforced belt spins dry on a steel crank pulley and a hard coated aluminum upper pulley and helps isolate crankshaft harmonics to the valve

Built with the finest materials available, our Camshaft Belt Drives feature several performance and valve train stability enhancements over traditional timing chains and gear drives. The Gates patented High Torq Drive™ reinforced belt spins dry on a steel crank pulley and a hard coated aluminum upper pulley and helps isolate crankshaft harmonics to the valve train. Teflon® coated high vacuum cam and crank seals are long lasting and insure the extreme amount of vacuum found in today’s race engines stays sealed in the crankcase. Cam timing can be externally adjustable ±10° in minutes to dial in the power curve and cam thrust can be reduced to as little as .001” with our available dual thrust cam adapter assemblies. 

Hot Shot’s Secret Introduces Adrenaline R82+ Competition Diesel Performance Additive

Hot Shot’s Secret extends the company’s Adrenaline® Racing product line with a new competition diesel performance additive – ADRENALINE R82+™. Formulated for competitive off-road vehicles, ADRENALINE R82+ combines a powerful cetane improver with Hot Shot’s Secret’s new ADRENALINE Racing Top Lube fuel lubricant to decrease wear by up to 41% in ASTM testing. The result is a diesel

Reid Machine’s 392 Shoe Rocker

The design of Reid Machine’s rocker arms provides the stability required in Top Fuel, Blown Alcohol, Injected, Fuel, and Pro Mod categories.

COMP Cams HRT Camshaft for Gen III Hemi

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life.  Related Articles – Amsoil

Edelbrock Performer RPM Gen III Hemi Cylinder Heads

Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says

Other Posts

Diamond’s Mercedes 6.2L M156 Piston Kits

Diamond’s Mercedes 6.2L M156 pistons are rated for 1,400 HP.

World Products’ Motown II SBC Iron Block

The Motown II can be bored to a maximum of 4.200″ with clearance for a 4.000″ crank.

Graymills BTU Series Digital Ultrasonic Benchtop Washers

Small footprints make these units ideal for job site “cell” cleaning applications or where space is critical.

Supertech Valves

A single-groove valve allows for more contact surface area, which leads to less friction.