Manley Turbo Tuff Tri-Beam Rod - Engine Builder Magazine

Manley Turbo Tuff Tri-Beam Rod

Given that “Supercars” are often subject to power upgrades, Manley Performance has developed a robust new addition to its Turbo Tuff® Tri-Beam connecting rod lineup that’s engineered for 2,000+ horsepower applications in the 5.2L V-10 engine found in Lamborghini Gallardo, Huracan and Audi R8 & S6 cars.

Forged from 300M steel, the rod features a distinctive ribbed design on the cap, beam and pin end to enhance structural integrity. Large radius cap corners with a shallow bolt spot face improves crank-end fatigue strength. Wrist pin oiling holes are placed at 10:00 and 2:00 to improve pin lubrication.

Manufactured entirely in the U.S., from forging to final machining, they are shot-peened to MIL spec and 100% individually magnafluxed. Both ARP2000 (220,000 psi) and premium ARP Custom Age 625+ (260,000 psi tensile strength nominal rating) rod bolts are available.

Manley’s Turbo Tuff® Tri-Beam rods are ideally suited to high-boost turbocharged and nitrous oxide assisted applications. For additional information call Manley’s tech team at 732-905-3366 or visit the company’s website at www.ManleyPerformance.com.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.