Goodson Cold Crack Repair Kit for Cast Iron Heads - Engine Builder Magazine

Goodson Cold Crack Repair Kit for Cast Iron Heads

The kit includes 100 genuine Irontite .235" x 15/16" threaded crack repair plugs plus the drill, reamer and two taps you'll need to insert them.

Since repairing cracks in cast iron heads is serious business, Goodson recently announced its .235″ Crack Repair Kit. This complete kit includes everything you need to repair a cracked cast iron cylinder head using the cold repair process.  

The kit includes 100 genuine Irontite .235″ x 15/16″ threaded crack repair plugs plus the drill, reamer and two taps you’ll need to insert them. Goodson also includes a cut-off saw with blade to trim the installed plugs to the proper height. You’ll also find Irontite All Weather Seal and Ceramic Motor Seal plus a can of Cutting & Tapping Fluid.

It’s all packed in a heavy-duty plastic carrying case. Order No. CRK-150

You May Also Like

COMP Cams HRT Camshaft for Gen III Hemi

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life.  The COMP Cams HRT

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life. 

Edelbrock Performer RPM Gen III Hemi Cylinder Heads

Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says

Amsoil Launches New 10W-30 Commercial-Grade Diesel Oil

AMSOIL has added a 10W-30 diesel oil to its Commercial-Grade family of products. New AMSOIL 10W-30 Commercial-Grade Diesel Oil is designed for those seeking an upgrade over conventional and other synthetic-blend oils in heavy-duty equipment and vehicles. It is a synthetic-blend product with greater than 50% synthetic content to help keep trucks and equipment operating

Cometic Spring Energized MLS Head Gaskets

These gaskets are available for GM LSX and LS applications.

Silver Seal Products’ Magnum 45 Valve Seat Wheels

An excellent wheel to use on diesel engine tractors and trucks.

Other Posts

Diamond’s Mercedes 6.2L M156 Piston Kits

Diamond’s Mercedes 6.2L M156 pistons are rated for 1,400 HP.

World Products’ Motown II SBC Iron Block

The Motown II can be bored to a maximum of 4.200″ with clearance for a 4.000″ crank.

Graymills BTU Series Digital Ultrasonic Benchtop Washers

Small footprints make these units ideal for job site “cell” cleaning applications or where space is critical.

Supertech Valves

A single-groove valve allows for more contact surface area, which leads to less friction.