LSI Chemical BoostPower 247C and 247K Gasoline Additives - Engine Builder Magazine

LSI Chemical BoostPower 247C and 247K Gasoline Additives

BoostClean247C is a concentrated detergent cleaner that will effectively clean deposits with only one fill-up while BoostPower247K is formulated to be a maintenance detergent cleaner additive to keep the engine clean and prevent build-up daily.

LSI Chemical, a leading manufacturer of fuel and oil additives for downstream fuel refiners and jobbers, is proud to introduce two new gasoline additives – BoostPower247C and BoostPower247K. Both are engineered to clean up harmful waxy deposits from fuel injectors and intake valves of port fuel injected engines and the combustion chambers of direct injected gasoline engines. 

BoostClean247C is a concentrated detergent cleaner that will effectively clean deposits with only one fill-up. With the elimination of harmful deposits, user benefits include improved drivability, restored fuel economy and power and a measurable reduction of exhaust emissions. The standard and recommended dosage is 2500 ppm wt./wt. 

BoostPower247K is formulated to be a maintenance detergent cleaner additive to keep the engine clean and prevent build-up daily. Though less effective than BoostPower247C, it is markedly less expensive and requires only 250 lbs. of additive per thousand barrels of gasoline instead of 2500 to arrive at 11 ounces per 20 gallons of fuel detergent. M111 results show that after a 60-hour test using E5 fuel treated with 283 mg/kg of BoostPower247K, there was a remarkable 61.3% clean-up of intake valve deposits. Both BoostPower247C and 247K works with any gasoline or gasoline/ethanol fuel mixture including E5, E15 and E85 Flex Fuel.

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.