Pro Car's Twin-Turbo 416 cid LT1 Engine - Engine Builder Magazine

Pro Car’s Twin-Turbo 416 cid LT1 Engine

Engine of the Week is presented by

After a customer brought his LT1-powered Camaro SS into Pro Car Associates a while back, shop owner Chris Wright was able to give him good horsepower. But, like any car guy worth his salt, it just wasn’t enough. Chris planned to supercharge the engine, but the customer wanted to go with twin turbos – that’s how this build became reality. It’s our Engine of the Week brought to you by PennGrade1, Scat Crankshafts and Elring.

You May Also Like

Wagler’s CX Billet 6.7L Cummins Engine

We caught up with Jeremy Wagler of Wagler Competition Products at the 2023 PRI Show, where he had two new billet engines to show us. One was a Duramax, and the other was this Wagler CX – a billet 6.7L Cummins-based engine that was designed with specific enhancements over a factory Cummins block for drag

Wagler CX

We caught up with Jeremy Wagler of Wagler Competition Products at the 2023 PRI Show, where he had two new billet engines to show us. One was a Duramax, and the other was this Wagler CX – a billet 6.7L Cummins-based engine that was designed with specific enhancements over a factory Cummins block for drag racers and pullers. Hear what Jeremy put into this engine in our Diesel of the Week!

Turbocharged 414 cid L8T Engine in a Honda S2000

As we’ve mentioned in other Sick Week interviews, there aren’t tons of import cars at the annual drag-and-drive event in Florida, so when we see something like RC Flint’s Honda S2000, we take notice. Upon further investigation, RC opted to forgo the 4-cylinder for a 414 cid L8T engine, and we got the full scoop

L8T engine
Big Wheels & Tires Make More Work for Your Engine & Transmission

There’s no denying that a big diesel truck with big, custom wheels and tires looks cool. But most people don’t look beyond the cool factor of that decision to understand what those larger wheels and tires could mean for the truck’s engine and transmission. We discuss the impact big wheels and tires can have in

FFRE’s Gen 3 Stage 3 Ford Coyote Engine

If you don’t already know, Fast Forward Race Engines has been making a name for itself in the Ford Coyote engine market. The New Port Richey, FL-based shop does engine and machine work on a few different platforms, but they specialize in the Coyote stuff, and thanks to that speciality, the shop has been a

Ford Coyote engine
Custom “Kingpin” Truck Features D&J’s Compound-Turbo 6.7L Cummins Engine

We had heard from D&J Precision Machine owner Drew Pumphrey that he’d have something special in the 2023 PRI booth, and he wasn’t lying. The custom-built “Kingpin” F600, done by Classic Car Studio, needed an engine. For that, they turned to Drew and the guys at D&J Precision Machine for a compound-turbo 6.7L Cummins engine.

Other Posts
Turbocharged 388 cid LS Engine

Kevin Smith and KSR Performance & Fabrication have been Sick Week staples. We caught up with him this year to get the details of his 1979 z28 Camaro named Soccer Mom and its brand-new turbocharged 388 cid LS engine built by Texas Speed. Check it out!

KSR LS engine
Twin-Turbo Gen II Coyote Engine

We’ve been more apt to check out Mustangs recently thanks to the high-performance potential of the Coyote engine, and Kolby Bouck’s 2017 Mustang with a Gen II Coyote engine is definitely no exception. Check out the details of this twin-turbo Gen II Coyote engine build!

Gen II Coyote engine
Turbocharged 521 cid Pontiac Engine

Known as the Canadian Chuck Norris, Richard Guido drives his 1965 Pontiac GTO literally everywhere. It’s not just a daily driver, but a venerable drag-and-drive competitor thanks to a turbocharged 521 cid Pontiac engine making nearly 1,500 horsepower!

Pontiac engine
Scat Red Label Series Rotating Assembly for Gen III Hemi Engines

Scat’s new Red Label Series rotating assemblies for Gen III Hemis feature a 4.050″ stroke crank, 4340 steel 6.125″ connecting rods, and 2618 RaceTec pistons.

Scat Hemi engine rotating assembly