MAHLE Ford EcoBoost 2.3L PowerPak Plus Piston Kit - Engine Builder Magazine

MAHLE Ford EcoBoost 2.3L PowerPak Plus Piston Kit

MAHLE Motorsport’s 2.3L PowerPak kit is loaded with value-added features for reliable power production for any 2.3L EcoBoost engine.

Now there’s a way to ensure more reliable power from EcoBoost powered 2.3L engines with the introduction of MAHLE Motorsport’s 4032 alloy Ford EcoBoost 2.3L PowerPak Plus Piston kit. Designed for heavy duty applications where the OE cast piston has been known to fail, MAHLE Motorsport has introduced a 4032 alloy option that not only adds much needed strength, but allows for a tighter piston to wall clearance for quieter cold startup. 

To help correct problems associated with the OE cast piston, MAHLE Motorsport manufactured this kit with a thick slipper skirt style forging and an enhanced OE crown design with increased radius for improved strength. Other special features include a heavy duty 0.200” wall thickness, H13 tool steel wrist pins, and a hard anodized top ring groove that is ideal for extreme duty applications. The pistons are engineered with thick 0.235” top and 0.200” second ring lands. These pistons are designed for OE 149.3 mm length connecting rods and OE 22.5mm Ø, wrist pins and an OE 32.8mm compression height. Valve pockets and depth accommodates both the 2.0L and 2.3L OE EcoBoost heads with a 9.5:1 compression ratio. 

This new PowerPak Plus kit is available in 87.51mm (part #197937145) and 88.00mm (#197937165) bore sizes and includes a Nitrided steel 1.2mm top, 1.2mm second, 2.8mm oil ring set. The pistons are coated with MAHLE’s unique GRAFAL®anti-friction skirt coating and phosphate to prevent microwelding and pin galling. 

For more information about MAHLE Motorsport’s Ford EcoBoost 2.3L 4032 alloy PowerPak Plus piston kit visit www.mahlemotorsports.com, or call MAHLE Motorsport toll free at 888-255-1942. To keep up with the latest from MAHLE Motorsports on social media, visit Facebook or Instagram or follow #mahlemotorsports.

You May Also Like

Jomar 3-Piece Adjustable Pushrod Guide Plate Kits

Jomar’s kits are available for 5/16” or 3/8” pushrods, and for small block Ford and Chevrolet.

Jomar

Make it easy to adjust the pushrod slots to get the perfect pushrod and rocker arm alignment with the Jomar 3-piece adjustable pushrod guide plate kits. A new design allows for adjustment of both width and angle, allowing you to save hours of time getting the correct alignment of the rocker arm to valve tip.

JMS Daytona CD-1 Full Race Ignition System

This system optimizes the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines.

Ignition
Fluidampr Toyota 2JZ Damper

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long-term durability and optimum power.

Fluidampr Toyota 2JZ damper
AMSOIL Marine Engine Oil Now in Gallons

This new package size offers added convenience for owners of boats with larger sumps.

AMSOIL marine oil
Holley Terminator X Max EFI Kit for Godzilla Engines

This Terminator X Max EFI kit for Godzilla engines is latest in Holley’s growing portfolio of engine swap solutions.

Holley Terminator EFI

Other Posts

Cometic Duramax Top End Gasket Kit

Cometic’s Duramax gasket kit includes: 4.130″ bore, .047″ MLX cylinder head gaskets.

Cometic Duramax gaskets
ACL Oil Pump Catalog

ACL RACE Series oil pumps are designed with high output and high volume capabilities.

Race Gas Diesel Performance Plus

Race Gas Diesel focuses specifically on cetane, oxygen and lubrication.

race gas diesel
B&B Performance Big Block Chevy Intake Manifold Spacers

The spacer kit includes end rails and are available for either rectangular port or oval port heads.

intake spacer