Moroso Pro-Mod Front Mount 24-Quart Dry Sump Tank - Engine Builder Magazine

Moroso Pro-Mod Front Mount 24-Quart Dry Sump Tank

Moroso's new dry sump tank can be adapted to many popular door car drag race chassis.

Moroso has introduced Part #22657, a Pro-Mod Front Mount 24-quart Dry Sump Tank. The tank body is 13″ tall, 6-¼” wide and 17″ long (not including the fittings or cap) with a 24-quart capacity. It also has a -12AN inlet, 1″ male supply (outlet), ¾” male hose nipple for venting.

The tank can be adapted to many popular door car drag race chassis. The sides of the tank have through bolt supports with billet reinforcement plates that serve two functions; to mount the tank and stabilize the tank during an engine blow up. Includes a large diameter, billet aluminum, screw-on cap with O-ring for positive sealing and a magnetic O-ringed drain bung. 

You May Also Like

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps

Properly preparing engine blocks, cylinder heads and other components for assembly should include thoroughly cleaning all threaded apertures. Debris can severely compromise accurately preloading a fastener, which is why ARP offers specially designed “chaser” taps.

These taps are not designed to cut threads; only clean them. ARP has expanded its tap offerings to include some 22 different sizes (SAE and metric), plus combination sets that feature the most popular sizes.

Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper

Other Posts

ProCharged 5.000” Bore Space Billet Big Block Chevy Engine

One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!

billet big block Chevy engine
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.