Moroso Ultra 40 Sleeved Ignition Wire Sets with 135 Degree Spark Plug Boots for GM LS - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

Moroso Ultra 40 Sleeved Ignition Wire Sets with 135 Degree Spark Plug Boots for GM LS

Engine Builder
By Engine Builder

Moroso has introduced Part #s 73850, 73851, Moroso Ultra 40, sleeved ignition wire sets with 135
degree spark plug boot for GM LS applications. These wire sets are available with either 8″ or 9.75″ wire lengths.

Related Articles

They are constructed out of Moroso Ultra 40, 7 mm Dia. Ignition Wire with 40 ohms of resistance per foot and have 135 Degree spark plug boots. The parts have black wire sleeving which extends spark plug life and protects against exhaust header heat, chaffing and contaminants.

The sleeving also adds extra dielectric strength which is wire’s ability to not to affected by outside electrical pulses. Each wire is terminated with heavy duty, high temperature, easy-pull/positive engagement spark plug boots and on the other end with matching coil boots, complete, ready to install.

PART # DESCRIPTION

73850 GM LS Wire Set, Ultra 40, Sleeved in Black, 135 Degree Spark Plug Boots, 8″ Long

73851. GM LS Wire Set, Ultra 40, Sleeved in Blacck, 135 Degree Spark Plug Boots, 9.75″ Long

You May Also Like

Products

Expanded Inline Fuel Filter Offerings from System 1

System 1 Filtration Products offers a wide selection of inline fuel filters for competition and street applications. They range in size from the large diameter long filter at 9” x 2-1/2” to the compact “Pro Street” model that measures 4-1/2”in length by 2” diameter. All are CNC-machined from 6061-T6 aluminum billet at System 1’s Tulare,

Engine Builder
By Engine Builder

System 1 Filtration Products offers a wide selection of inline fuel filters for competition and street applications. They range in size from the large diameter long filter at 9” x 2-1/2” to the compact “Pro Street” model that measures 4-1/2”in length by 2” diameter. All are CNC-machined from 6061-T6 aluminum billet at System 1’s Tulare, CA facility and black anodized.

Read Full Article

More Products Posts
Harrop TVS2650 Supercharger Kit for LT4 Engines

The Supercharger upgrade utilizes the largest, most-efficient rotating group ever produced by Eaton.

By Engine Builder
D&J 6.7L Ford Powerstroke X-Beam Rods 2017-2019

D&J has designed these rods with pressure-lubed wrist pins for the best in durability and performance.

By Engine Builder
Wiseco RED Series Forged Pistons

RED series piston kits are available for a range of popular, domestic V8 platforms for applications from drag racing to circle track.

By Engine Builder
PAC Small Diameter Solid Roller Springs

These springs are an excellent upgrade choice in any engine platform running a solid roller type lifter.

By Engine Builder

Other Posts

Cometic Gasket GM L83 Gen-5 Gasket Kit

The gasket kit features a 3.875″ bore and an .058″ MLX cylinder head gasket among other items.

By Engine Builder
Jesel Cam Belt Drive Systems

Built with quality materials, Jesel’s camshaft belt drives feature several performance and valvetrain stability enhancements over traditional timing chains and gear drives.

By Engine Builder
Silver Seal Deluxe Valve Stem Height Gauge Set

The height gauge set includes a .001″ dial indicator with a solid billet aluminum base.

By Engine Builder
Motor State Distributing ’23-’24 Engine Builders Parts & Accessories Catalog

This sourcebook continues to serve the needs of engine builders throughout the performance industry.

By Engine Builder