Holley Transmission Installation Kits for Small-Block and Big-Block Chevy Applications - Engine Builder Magazine

Holley Transmission Installation Kits for Small-Block and Big-Block Chevy Applications

Holley’s Transmission Installation Kits come complete with everything you will need to bolt a Tremec TKX or TKO transmission to a Chevrolet Small-Block or Big-Block V8 built between 1955 and 2000.

The kits are built using a mixture of our best brands, including Lakewood, Hays and Mr. Gasket, these kits include items like the pilot bearing, bellhousing, flywheel, clutch and pressure plate, and the hardware that you will need to complete the installation. Be sure to check the kit you will need for your application to see all of the included parts.

You May Also Like

MAHLE Motorsports Introduces 2023 Porsche Application Guide

MAHLE Motorsport announces the 2023 Porsche Application Guide. The guide offers a complete listing of all Porsche-specific piston kits, offered applications, and features user-friendly sections of Water-Cooled and Air-Cooled listings subdivided based on engine size and application. MAHLE’s machine-forged Porsche pistons have lightweight slipper skirts to reduce friction and are dual-coated with Phosphate and MAHLE’s

MAHLE Motorsport announces the 2023 Porsche Application Guide. The guide offers a complete listing of all Porsche-specific piston kits, offered applications, and features user-friendly sections of Water-Cooled and Air-Cooled listings subdivided based on engine size and application.

MAHLE’s machine-forged Porsche pistons have lightweight slipper skirts to reduce friction and are dual-coated with Phosphate and MAHLE’s proprietary GRAFAL® skirt coating to reduce drag, wear, and noise. Piston kits include performance ring sets made from durable materials that are designed to provide consistent contact with the cylinders resulting in increased sealing and oil control.

ProForm Mopar Rocker Arm Kits

MOPAR Emblem Rocker Arm offerings are expanding to include both 1.6 Ratio (LA & B/RB engine families), and 1.7 Ratio (B/RB engines). Features include a roller tip design, internal oiling shaft-to-rocker channel system to lubricate the pivot area, and low-friction bronze bushings; all the same as the popular, high demand MOPAR Emblem 1.5 ratio rockers.

KUKA’s LBR iisy Cobot Ready-To-Use Automation

Referred to as Sensitive Cobotic technology, KUKA’s LBR iisy represents the future of automation. The cobot is ready-to-use automation that quickly and easily integrates into any manufacturing application from pre-defined production processes to open, unstructured work environments with unpredictable conditions from one job to the next. Related Articles – Isky Dual Valve Spring Set – Plazmaman Ford

MGP Billet Aluminum Rods Available Through Diamond

Popular rod applications in stock include small block and big block Chevy, as well as Gen II Chrysler Hemi.

JE Pistons 13-Degree Small Block Chevy Piston

JE recently added to its lineup of circle track pistons with an all-new, 13-degree, small block Chevy design. JE worked closely with engine builders to design a dome and valve pocket profile that fits almost all aftermarket 13-degree SBC cylinder heads on the market.  Related Articles – MAHLE Aftermarket Expands Engine Cylinder Head Gasket Portfolio – Total

Other Posts

422 cid Small Block Chevy Circle Track Engine

We were treated to a shop tour of Terry’s Machine Shop by owner Todd Gilliam. This old-school machine shop outside of St. Louis does a little bit of everything, and they had just wrapped up this badass 422 cubic inch small block Chevy engine for a circle track customer. Check it out!

Reviewing Holley’s Terminator X EFI System

As part of our small block Ford build, we decided to use Holley’s Terminator X EFI system for plug and play Ford V8 engine control. Chris Wright of Pro Car Associates and Greg Jones of Engine Builder review all that the Terminator X offers and why Holley has been a leader in this product category.

Circle Track Small Block Chevy Engine

We stopped into Terry’s Machine Shop in Bridgeton, MO during a recent visit to the St. Louis area. we met with shop owner Todd Gilliam, who treated us to a shop tour and was kind enough to give us a rundown of this small block Chevy circle track engine he had just finished up for

Holley Announces 2023 Event Dates

Holley Performance Parts has revealed the dates for its popular high-performance race events, including an all-new gathering for LS enthusiasts in Texas.  Related Articles – Edelbrock’s Smitty Smith Dies at Age 70 – PerTronix Performance Brands Promotes Jeff Stacy – NASCAR Announces Hall of Fame Class of 2023 Induction Holley is again bringing its LS