Trend Performance Precision Pushrods - Engine Builder Magazine

Trend Performance Precision Pushrods

These pushrods are created from 4130 chromoly thick-wall tubes and are made to tight tolerances.

Trend’s line of Precision pushrods are machined to some of the most exacting tolerances in the industry at +/- .0005″. They are polished, cleaned, 100% individually inspected and packaged in individual sleeves with near-surgical exactness.

The Precision series is the upper echelon of pushrod design and manufacturing and favored by NASCAR cup teams turning nearly 10,000 rpm for hundreds of laps at a time. When it comes to durability and attention to detail, the Precision series is certainly a quality option.

These pushrods are created from 4130 chromoly thick-wall tubes, and are made to tight tolerances: ball end radius to plus or-minus .001″ in OD and length to plus-or-minus .005″. Every pushrod is checked to ensure accurate length and is cleaned with a special brush and solvent to ensure its internals are free of heat treat scale or other contaminants.

Trend’s Precision pushrods are available in lengths from 7.000″ to 11.5″ and in increments of .025″. Diameters include 7/16″ or 1/2″ or 9/16″ and with ball-ball ends or ball-cup ends in either 5/16″ or 3/8″. For more info: http://trendperform.com/

You May Also Like

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Elgin Industries’ Elgin Pro-Stock range of performance parts now includes OE-quality hydraulic roller lifter/guide assemblies for 2004 and newer Chrysler Hemi engines without Multiple Displacement System (MDS) cylinder deactivation. This includes non-MDS 5.7L, 6.1L and 6.4L engines, model years 2004 and newer, and replaces OE #5038787AD (lifter) and #53021721AA (guide). Each is pre-assembled for fast, accurate drop-in installation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Other Posts

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.