Billet Cylinder Head Repair - Engine Builder Magazine

Billet Cylinder Head Repair

Following the 2022 Drag Week event, Steve Morris needed to repair one of the cylinders in Drag Week winner Tom Bailey’s Sick Seconds 2.0 drag car. Watch as he walks you through the process to get this head like brand new.

You May Also Like

Is Lower Viscosity Oil Better?

As OEMs continue to face pressure for better fuel economy, the recommended oil in vehicles continues to move toward lower viscosities. However, are those lower viscosities better for your engine? We discuss the differences in oil viscosity and how it helps your engine in this episode of AMSOIL Garage.

As OEMs continue to face pressure for better fuel economy, the recommended oil in vehicles continues to move toward lower viscosities. However, are those lower viscosities better for your engine? We discuss the differences in oil viscosity and how it helps your engine in this episode of AMSOIL Garage.

Wilkins Racing Engines’ 347 cid Small Block Chevy Engine

Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It’s our Engine of the Week!

All About Those Valves

We recently sat down with Ryan Hamilton and Phil Data of SBI, as well as D&J Precision Machine owner Drew Pumphrey to talk about everything valves – problem areas, materials, sizes, angles, valve jobs, seats, and even springs. Check out this latest Intellectual Horsepower episode brought to you by SBI. Related Articles – Clay Millican’s

CNC Fabrication’s Turbocharged 7.3L Powerstroke Engine

During this past summer’s Ultimate Callout Challenge, we came across CNC Fabrication’s booth and got the chance to speak with owner Corey Hurtt about his business and the brand-new 7.3L Powerstroke engine they built. The engine was just finished at the time, but Corey had plans to eventually run the truck in the ODSS 5.90

Drag-and-Drive Billet Big Block Chevy Engine

Pete Harrell of Harrell Engine & Dyno in Mooresville, NC specializes in forced induction builds and “polishing turds,” as he likes to put it. He got this build extra polished, as it features a 540 cubic inch billet aluminum big block Chevy block for drag-and-drive events. Hear what else went into the build directly from

Other Posts

Engine Builder Magazine Announces 2023 Diesel of the Year Winner

Engine Builder magazine has announced its annual Diesel of the Year winning engine – a Billet 7.0L Powerstroke – based on the 6.0L platform and built by Jared Alderson of Kill Devil Diesel in Poplar Branch, NC. Members of Kill Devil Diesel accepted the Diesel of the Year award at Engine Builder’s PRI Party, sponsored

Twin-Turbo 4.8” Bore Space Billet Hemi Engine

There’s a lot of impressive engines that come out of Noonan Race Engineering in Spartanburg, SC. But, the 4.8″ bore space billet Hemi engine was the one that started it all for the high-performance engine and machine shop. Check out the details of this water block 4.8″ bore space billet Hemi.

Billet Blocks and Heads vs. Cast Iron

Billet aluminum has a lower yield strength or higher modulus of elasticity, meaning it will flex, or absorb energy easier under tension or stress than cast aluminum, without incurring permanent damage.

HED’s 540 cid Billet Big Block Chevy Engine

As drag-and-drive events continue to emerge and grow in popularity, more and more competitors are looking to up their cars’ performance levels on both the track and street. That’s exactly why this particular customer came to Pete Harrell and Harrell Engine & Dyno for a 540 cubic inch billet big block Chevy engine build. Check it out!