Tips and Techniques from Lucas Oil to Keep Vehicles and More Protected During the Cold - Engine Builder Magazine

Tips and Techniques from Lucas Oil to Keep Vehicles and More Protected During the Cold

Supercars, motorcycles, hot rods and even riding lawn mowers all have engine oil systems, fuel systems, transmissions and other components that require winter prep.

Each fall, owners of sports cars, hot rods, powersports vehicles and other warm-weather “toys” should begin preparing for several months of cold weather. Snow, sleet, ice and freezing temperatures can cause serious problems with vehicles and equipment, but following a few simple preparation steps with the help of Lucas Oil products will ensure those prized possessions are ready to go next spring.

Supercars, motorcycles, hot rods and even riding lawn mowers all have engine oil systems, fuel systems, transmissions and other components that require winter prep. While it might sound daunting, proper prep doesn’t take much time or mechanical knowledge — but failing to do so can range from a small repair bill to very expensive system failures.  

Storage Location 

It should go without saying, but finding a good location that is dry and protects from the elements is a great first start to a solid storage strategy. Garages, sheds, barns or self-storage facilities all make great storage locations. While outside storage isn’t recommended, sometimes it’s all someone has so the use of a high-quality, waterproof storage cover can also provide very good protection. 

Cleaning

Most drivers with classics or sports cars keep their cars spotless, but it’s important that a thorough cleaning, inside and out, is performed before being put into storage. Dirt and debris can degrade paint, metal surfaces and trim parts so a thorough cleaning is critical. Luckily, Lucas offers great products designed to make this process easy. Lucas Slick Mist Speed Wax and the all-new Lucas Slick Mist Ceramic Speed Wax both offer long-lasting protection from the elements, Just spray on and wipe off before placing in storage for a full season of defense against dust and dirt. Cleaning isn’t limited to the exterior of vehicles either. Lucas Complete Engine Treatment can be used to clean and lubricate the entire fuel system from the tank to injectors, and when added to engine oil, it cleans the oil system reducing gum and varnish buildup, while improving cold temperature fluidity.

Fuel System

As mentioned, the cleanliness and preparation of fuel systems should be a priority. Using Lucas Oil Deep Clean Fuel Treatment during that final fill up will help make sure the fuel system is nice and clean before going into storage. However, gasoline degrades over time causing changes to its chemical properties which can damage fuel-system components. To prevent potential issues, a bottle of Lucas Fuel Stabilizer should be added to the tank to slow the degradation of gasoline and ethanol, a main cause of gum and varnish deposits. The Fuel Stabilizer also cleans, lubricates and maintains fuel pumps, carburetors, fuel injectors and compression rings. Vehicle owners should also fill their tanks to 90% their capacity to prevent excess water condensation build up. 

Battery Maintenance – Although classic cars with old electronics are often known for draining a battery, every vehicle, motorcycle and piece of lawn equipment with a battery should have its battery disconnected or placed on a battery tender. That will ensure the battery stays in good shape and is ready to be put right back in action next spring. 

Engine Oil – Oil changes are part of routine maintenance which should be up to date when placing something in storage for the winter. However, just having clean oil isn’t enough for those who want the very best protection for their prized possession. By adding a bottle of Lucas Oil Low-Viscosity Stabilizer or Heavy Duty Oil Stabilizer, vehicles are given an added layer of protection from dry starts and excess friction, as well as heat and wear in any type of engine. It also provides added lubrication which reduces oil consumption and operating temperatures. It’s important to note that these stabilizers are not just great for storage, they should be included with every oil change.

“Whether you’re a casual sports car owner or a dedicated classic car owner who does their own maintenance, planning for winter storage needs to start early and involve the right products. We have been trusted for decades to keep engines, fuel systems and more protected against harsh driving conditions and preparing for winter storage should be no different,” said Morgan Lucas, President of Lucas Oil. “Vehicles in storage can develop a lot of serious problems without certain preventive measures, and we are proud to say that Lucas Oil products are trusted by people around the world to keep those classics and other prized vehicles running great, year after year.”

Lucas Oil products can be found at thousands of retailers around the world, and are also available to purchase online. To find the closest retailer, please visit the company’s Where to Buy retail location finder.

For more information or to schedule an executive interview, please contact [email protected].

You May Also Like

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

Other Posts

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.