A custom-ground camshaft can be the component that maximizes the performance from your engine combination. Erson custom-ground camshafts are ground on premium American made cores and feature superior straightness, profile accuracy, surface finish and base circle runout. Every Erson custom-ground camshaft is Cam-Pro certified.
For more info: http://www.pbm-erson.com/Catalog/Erson
Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life. The COMP Cams HRT
Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life.
Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says
AMSOIL has added a 10W-30 diesel oil to its Commercial-Grade family of products. New AMSOIL 10W-30 Commercial-Grade Diesel Oil is designed for those seeking an upgrade over conventional and other synthetic-blend oils in heavy-duty equipment and vehicles. It is a synthetic-blend product with greater than 50% synthetic content to help keep trucks and equipment operating
These gaskets are available for GM LSX and LS applications.
An excellent wheel to use on diesel engine tractors and trucks.
Diamond’s Mercedes 6.2L M156 pistons are rated for 1,400 HP.
The Motown II can be bored to a maximum of 4.200″ with clearance for a 4.000″ crank.
Small footprints make these units ideal for job site “cell” cleaning applications or where space is critical.
A single-groove valve allows for more contact surface area, which leads to less friction.
