Jeremy Mifflin's ProCharged 427 cid Small Block Ford Engine - Engine Builder Magazine

Jeremy Mifflin’s ProCharged 427 cid Small Block Ford Engine

Engine of the Week is presented by

Among the larger crowd of big block Chevy and Hemi engines seen at the 2022 Builder’s Brawl this past summer was Jeremy Mifflin and his ProCharged 427 cubic inch small block Ford. He stood out from the rest, but in a good way, and his Ford is our Engine of the Week!

You May Also Like

Dream Engine Giveaway Ep. 4 – Bottom End Assembly

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Thanks to our Component PartnersWorld

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components.

How Heat Affects Clearances in a Block

Steve Morris Engines has a Lamborghini engine block in the shop and Steve demonstrates how heat can affect the clearances. Related Articles – Doc Baker’s Supercharged 500 cid Billet Hemi Engine – One-on-One with Katie Coleman of LinCo Diesel Performance – Chris Patterson’s Triple-Turbo 6.7L Cummins Engine

Doc Baker’s Supercharged 500 cid Billet Hemi Engine

Doc Baker is an engine builder and racer who does things his own way. We were excited to learn more about his 1971 Dodge Demon with a supercharged 500 cid billet Hemi engine in it, and caught up with Doc at the 2022 Builder’s Brawl race event at World Wide Technology Raceway. Check it out!

One-on-One with Katie Coleman of LinCo Diesel Performance

We got to visit LinCo Diesel Performance in Troy, MO, just outside St. Louis, back in early 2022. It was then that we were introduced to Katie Coleman, a cylinder head specialist at the shop, but an industry vet with 15+ years of experience. She was extremely sought after when shops found out she was

Chris Patterson’s Triple-Turbo 6.7L Cummins Engine

Chris Patterson of Unrivaled Diesel has hit some of the highest horsepower levels ever seen on the chassis dyno. We caught up with the Texas-based shop owner to get a run down of his 6.7L Cummins engine and his 2022 UCC weekend. Diesel of the Week is brought to you by AMSOIL INC. Related Articles

Other Posts

422 cid Small Block Chevy Circle Track Engine

We were treated to a shop tour of Terry’s Machine Shop by owner Todd Gilliam. This old-school machine shop outside of St. Louis does a little bit of everything, and they had just wrapped up this badass 422 cubic inch small block Chevy engine for a circle track customer. Check it out!

Supercharged 500 cid Billet Hemi Engine

Doc Baker is a racer and builder who does things his own way. A perfect example of his work can be seen under the hood of his 1971 Dodge Demon – this supercharged 500 cubic inch billet Hemi engine. Check out what went into the build!

JE Pistons 13-Degree Small Block Chevy Piston

JE recently added to its lineup of circle track pistons with an all-new, 13-degree, small block Chevy design. JE worked closely with engine builders to design a dome and valve pocket profile that fits almost all aftermarket 13-degree SBC cylinder heads on the market.  Related Articles – Holley Gen-V Swap Oil Pan – Xceldyne High-Performance Valvetrain Components

Plazmaman Ford Coyote Billet Intake Manifold

Plazmaman has been at the forefront in street and strip inlet manifold design since the early 90s, and this Coyote manifold is nothing short of spectacular.