MAHLE Motorsport Ford 5.0L Modular Coyote Gen 3 Direct Injected PowerPak Piston Set - Engine Builder Magazine

MAHLE Motorsport Ford 5.0L Modular Coyote Gen 3 Direct Injected PowerPak Piston Set

These pistons are dual coated with phosphate and MAHLE’s proprietary GRAFAL® coating for reduced drag and wear.

Ford Modular engine builders can now indulge in their quest for more power with the introduction of MAHLE Motorsport’s new Ford 5.0L, Modular Coyote PowerPak Piston set for 2018+ engines.  This piston set is designed to lower the compression ratio to 10.4 to 1 to allow for power adders for those that want to build a high horsepower Coyote build. 

The pistons are dual coated with phosphate and MAHLE’s proprietary GRAFAL® coating for reduced drag and wear. This set features hard anodized top ring grooves for maximum durability for extreme duty applications and comes complete with a 1.0, 1.0, 2.0mm file fit performance ring set, and 0.177 wall pins each weighing 118 grams. The piston compression height is 1.167 and weighs 383 grams.  The slipper skirt forged piston set utilizes a low silicon 2618 alloy for high load, high stress applications. 

For more information about MAHLE Motorsport’s Ford Coyote PowerPak set (part# 930258762), visit the MAHLE Motorsport booth #1601 at the 2022 PRI Show, view this video, visit MahleMotorsports.com, or call MAHLE Motorsport toll free at 888-255-1942. To keep up with the latest on MAHLE Motorsport in social media, visit Facebook or Instagram or follow #mahlemotorsports.

You May Also Like

PBM Rotating Assemblies

Hundreds of stroke and bore combinations are available, including custom assemblies.

PBM Performance Products offers a wide range of rotating assemblies such as their Ultimate Billet Series, 4340 Ultralite, 4340 Superlites, and Standard Weight Forged Crankshafts. Hundreds of stroke and bore combinations are available.

Custom assemblies are a specialty. PBM rotating assemblies have a proven reputation of quality, durability and performance.

New Fuel Rail Products From Radium Engineering

Radium Engineering has released several new products over the last two months. Take a look below to see what’s new. All products are in stock and available for purchase right now.

Rottler’s EM45 CNC Machine

The EM45 features universal CNC technology designed for all engine shops and allows you to probe, surface and bore on the same machine.

Sunnen’s LBB-1660 Manual Hone

Sunnen’s LBB-1660 produces a round and straight honed bore, equal to or better than manufacturers’ new rods.

Reid Machine’s 392 Intake Roller Rocker Arms

These rocker arms come ready to handle just about any racing application.

Other Posts

MAHLE Aftermarket Extends Partnership with Motorsports Icon Casey Currie

MAHLE Aftermarket has renewed its partnership with motorsports legend Casey Currie for the 2023 season, marking six years of collaboration, including the development of a custom vehicle build for the inaugural “MAHLE: The Choice of Champions” technician promotion. Casey is also an integral member of the MAHLE engine parts test team and regularly participates in

Oliver Racing Big Block Chevy Max-Plus Connecting Rods

These new rods are beefed up in all right places to tackle high-horsepower applications.

Darton Sleeves’ Seal Tight Sleeve Kits

Darton’s sleeve kit maximizes fitment and installation ease.

MAHLE Motorsports Introduces 2023 Porsche Application Guide

MAHLE Motorsport announces the 2023 Porsche Application Guide. The guide offers a complete listing of all Porsche-specific piston kits, offered applications, and features user-friendly sections of Water-Cooled and Air-Cooled listings subdivided based on engine size and application. Related Articles – ProForm Mopar Rocker Arm Kits – KUKA’s LBR iisy Cobot Ready-To-Use Automation – MGP Billet