Installing Flanged Sleeves in a Cummins Block - Engine Builder Magazine

Installing Flanged Sleeves in a Cummins Block

Jeff McCord at LinCo Diesel Performance walks you through the necessary steps for properly sleeving a block. It might sound like a simple process, but any errors can mean catastrophic head failure down the road.

You May Also Like

The Story of Callies Performance Products

We recently got access to go inside Callies Performance Products‘ Fostoria, OH facility and speak with owner Rick Norton and his son Heath Norton, up close and personal. What we got was the story of how Callies came to be a leading manufacturer of engine components, and where the company is going next.

We recently got access to go inside Callies Performance Products' Fostoria, OH facility and speak with owner Rick Norton and his son Heath Norton, up close and personal. What we got was the story of how Callies came to be a leading manufacturer of engine components, and where the company is going next.

Reviewing Cometic Gasket’s MLX Head Gaskets

We got a set of Cometic Gasket’s MLX head gaskets for a small block Ford build we’re doing. Our head gaskets are a standard layout Ford head gasket with a .040″-.044″ thickness and designed to fit a 4.125″ bore. The difference between an MLS and Cometic’s MLX gasket, which stands for Multi-Layer-Xtreme, is an extra

Dream Engine Giveaway Ep. 4 – Bottom End Assembly

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Related Articles – One-on-One with

How Heat Affects Clearances in a Block

Steve Morris Engines has a Lamborghini engine block in the shop and Steve demonstrates how heat can affect the clearances. Related Articles – Colin Jost’s 521 cid Blown Big Block Chevy Engine – EB Takeover: Bullet Racing Engines – One-on-One with Monster Jam Driver Kayla Blood

Doc Baker’s Supercharged 500 cid Billet Hemi Engine

Doc Baker is an engine builder and racer who does things his own way. We were excited to learn more about his 1971 Dodge Demon with a supercharged 500 cid billet Hemi engine in it, and caught up with Doc at the 2022 Builder’s Brawl race event at World Wide Technology Raceway. Check it out!

Other Posts

1,000 Horsepower LB7 Duramax Engine

Like many before him, Bryan Woitas got bit by the diesel bug after experimenting with some mild power-adders on his daily driver. Years later, he has a 1,000-horsepower LB7 Duramax to show off!

Honing the LS

Modern honing techniques are as much a performance concern as they are part of engine design, and that’s thanks to the much tighter tolerances and specifications engines need these days. 

Rottler’s EM45 CNC Machine

The EM45 features universal CNC technology designed for all engine shops and allows you to probe, surface and bore on the same machine.

Dual Compound-Turbo 6.6L LBZ Duramax Engine

Not only does this 1954 Chevrolet 3100 house a hefty 6.6L LBZ Duramax engine, it boasts a quad-turbo setup and enough piping to blow your mind! Check it out!