Plazmaman Ford Coyote Billet Intake Manifold - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

Plazmaman Ford Coyote Billet Intake Manifold

Plazmaman has been at the forefront in street and strip inlet manifold design since the early 90s, and this Coyote manifold is nothing short of spectacular.

Engine Builder
By Engine Builder

Plazmaman’s Ford Coyote Mustang 5.0 Billet Intake Manifold is a CNC billet aluminum race spec inlet manifold to suit the late-model Ford Mustang 5.0L engine. Plazmaman has been at the forefront in street and strip inlet manifold design since the early 90s, and this Coyote manifold is nothing short of spectacular.

Related Articles

Racing design and feedback have been combined, along with Solid Works Computational Fluid Dynamics Software, to produce this cutting-edge product. Designed to be used with 8 or 16 injectors. Comes with high-flow billet fuel rails and a lifetime structural guarantee.

*Currently in early development. Over 1,630 hp at the wheels has been flowed through the Plazmaman intake with a 7.75sec @154mph 1/4 mile time slip on a street-based Mustang.

For more info: www.plazmaman.com

You May Also Like

Products

Harrop TVS2650 Supercharger Kit for LT4 Engines

The Supercharger upgrade utilizes the largest, most-efficient rotating group ever produced by Eaton.

Engine Builder
By Engine Builder

Harrop has released the innovative TVS2650 Supercharger Upgrade Kit for the factory TVS1740 Supercharged LT4 6.2L V8 found in the ZL1 Camaro, C7 Z06 Corvette, and CTS-V Cadillac.

The Supercharger upgrade utilizes the largest, most-efficient rotating group ever produced by Eaton, the TVS2650 and enhances the intercooler system with 2.5 times larger twin, dual-pass intercooler cores integrated in the manifold assembly.

Read Full Article

More Products Posts
D&J 6.7L Ford Powerstroke X-Beam Rods 2017-2019

D&J has designed these rods with pressure-lubed wrist pins for the best in durability and performance.

By Engine Builder
Wiseco RED Series Forged Pistons

RED series piston kits are available for a range of popular, domestic V8 platforms for applications from drag racing to circle track.

By Engine Builder
PAC Small Diameter Solid Roller Springs

These springs are an excellent upgrade choice in any engine platform running a solid roller type lifter.

By Engine Builder
Cometic Gasket GM L83 Gen-5 Gasket Kit

The gasket kit features a 3.875″ bore and an .058″ MLX cylinder head gasket among other items.

By Engine Builder

Other Posts

Kill Devil Diesel’s 7.0L Billet Powerstroke Engine

The team at Kill Devil Diesel does some amazing work surrounding all light-duty diesel engines, but the Poplar Branch, NC-based shop specializes in Ford Powerstroke work. As such, they do a ton of trick stuff on 6.0L Powerstrokes, and we got a first glimpse at a billet 7.0L/6.0L Powerstroke build for Charlie Fish of KC

By Greg Jones
Twin-Turbo 347 cid Small Block Ford Engine

Kyle Morris of Steve Morris Engines built up this 1996 Mustang with a twin-turbo 347 cubic inch small block Ford engine primarily by himself. It’s been about a decade in the making, but now Kyle has a 7-second capable car primed for drag-and-drive competition. See what went into the 1,800-hp engine!

By Greg Jones
Mild vs. Wild (Diesel Edition) Ep 5 – 6.7L Powerstroke Builds

Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC. Related Articles

By Engine Builder
Kyle Morris’ Twin-Turbo Small Block Ford Engine

As Steve Morris’ son, Kyle Morris is no stranger to engine work and drag racing from his seat at Steve Morris Engines. This 1996 Mustang was purchased by Kyle at the age of 15, and he now has it ready to rip 7- and 8-second 1/4-mile passes thanks to an 1,800-horsepower, twin-turbo small block Ford

By Greg Jones