Sunnen's LBB-1660 Manual Hone - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

Sunnen’s LBB-1660 Manual Hone

Sunnen's LBB-1660 produces a round and straight honed bore, equal to or better than manufacturers' new rods.

Engine Builder
By Engine Builder

Sunnen’s LBB-1660 Manual Hone is a low-cost system for precision rod reconditioning and pin fitting. The complete Sunnen Rod Reconditioning System includes honing machine, gage, cap and rod grinder and tooling.

Related Articles

The LBB-1660 produces a round and straight honed bore, equal to or better than manufacturers’ new rods. It keeps your rod inventory to a minimum and enables you to give over-the-counter service on customers’ own rods. In addition, it reconditions eight passenger car rods in less than 40 minutes. Honing units for complete rod reconditioning diameter range of 1.450″ to 4.700″ (36.9-119.4 mm). Lifetime application service comes with every machine purchase.

The best part is in only a few jobs a month, you’ll pay for your system. Plus, the LBB-1660 will be one of the most versatile machines in your shop. In addition to rod reconditioning, it does King Pins, air compressors and small bore engines like those used on motorcycles, boats and lawn mowers.

For more info: sunnen.com

You May Also Like

Products

Expanded Inline Fuel Filter Offerings from System 1

System 1 Filtration Products offers a wide selection of inline fuel filters for competition and street applications. They range in size from the large diameter long filter at 9” x 2-1/2” to the compact “Pro Street” model that measures 4-1/2”in length by 2” diameter. All are CNC-machined from 6061-T6 aluminum billet at System 1’s Tulare,

Engine Builder
By Engine Builder

System 1 Filtration Products offers a wide selection of inline fuel filters for competition and street applications. They range in size from the large diameter long filter at 9” x 2-1/2” to the compact “Pro Street” model that measures 4-1/2”in length by 2” diameter. All are CNC-machined from 6061-T6 aluminum billet at System 1’s Tulare, CA facility and black anodized.

Read Full Article

More Products Posts
Harrop TVS2650 Supercharger Kit for LT4 Engines

The Supercharger upgrade utilizes the largest, most-efficient rotating group ever produced by Eaton.

By Engine Builder
D&J 6.7L Ford Powerstroke X-Beam Rods 2017-2019

D&J has designed these rods with pressure-lubed wrist pins for the best in durability and performance.

By Engine Builder
Wiseco RED Series Forged Pistons

RED series piston kits are available for a range of popular, domestic V8 platforms for applications from drag racing to circle track.

By Engine Builder
PAC Small Diameter Solid Roller Springs

These springs are an excellent upgrade choice in any engine platform running a solid roller type lifter.

By Engine Builder

Other Posts

Why You Should Machine Your Connecting Rods

While products straight from the factory are typically in excellent condition and manufactured to certain specs, it’s always a good idea to double check all aspects to ensure a component is how you want it. MTI Racing recently noticed some taper on a set of rods, so they took the time to machine the pin

By Engine Builder
Sunnen Named Official Honing Equipment Partner of Hendrick Motorsports

Hendrick Motorsports has named Sunnen Products Company its Official Honing Equipment Partner as the team pursues its record-extending 15th NASCAR Cup Series championship. The partnership puts the new Sunnen SV-series honing machine in the Hendrick Motorsports engine operation alongside numerous other Sunnen honing and engine building machines. The SV-series is the next generation of the

By Engine Builder
Why You Should Magnaflux Your Engine Parts

The guys at MTI Racing were looking to put together a Nissan GT-R engine, but first they Magnafluxed the crank and rods, and it’s a good thing they did. To ensure parts can get reused and don’t have signs of stress and cracks, magnafluxing can save you from more expensive repairs down the road. Related

By Engine Builder
What Goes Into Steve Morris Engines’ SML Heads?

Watch as Steve Morris walks you through aspects of his new SML platform, including a look at the transformation the cylinder heads go through from a solid chunk of billet aluminum to a finished product. Related Articles – Kyle Morris’ Twin-Turbo Small Block Ford Engine – Tina Pierce’s Twin-Turbo 509 cid Big Block Chevy Engine

By Steve Morris