Cleaning with Dry Ice? Cold Jet's Kevin Must Explains - Engine Builder Magazine

Cleaning with Dry Ice? Cold Jet’s Kevin Must Explains

More and more these days, shops are looking for better, easier and more sustainable ways to clean engine components and parts. Enter Cold Jet, a 30-year-old company that offers eco-friendly cleaning solutions to numerous industries including engine rebuilding, using dry ice blasting.

You May Also Like

Paul’s High Performance Nitrous-Powered Ford Godzilla Engine

GODZILLA!!!!! We stopped by the Fluidampr booth at the 2022 PRI Show to say hi and found Paul Svinicki of Paul’s High Performance hanging out, along with his nitrous-powered Ford 7.3L Godzilla engine that runs in his 2010 Cobra Jet Ford Mustang. This 1,100-horsepower Godzilla is our Engine of the Week.

GODZILLA!!!!! We stopped by the Fluidampr booth at the 2022 PRI Show to say hi and found Paul Svinicki of Paul's High Performance hanging out, along with his nitrous-powered Ford 7.3L Godzilla engine that runs in his 2010 Cobra Jet Ford Mustang. This 1,100-horsepower Godzilla is our Engine of the Week.

Block Machining with Rottler’s F69A Pt. 2

Steve and the guys previously walked through decking and boring a block on the new Rottler F69A machining center. Now, they walk through lifter bores and receiver grooves. Related Articles – David Pilgrim’s Dual Compound-Turbocharged 6.6L LBZ Duramax Engine – EB Takeover: New Performance Automotive – Reviewing Cloyes’ Race Billet True Roller Timing Set

David Pilgrim’s Dual Compound-Turbocharged 6.6L LBZ Duramax Engine

David Pilgrim and his wife Debbie began looking into drag racing after attending an NHRA event, which eventually led to the pair entering the Bonneville Salt Flats scene. Following a few turbocharged motorcycle builds and a C5 Corvette, David got the idea for a 1954 Chevrolet 3100 with a dual compound-turbocharged 6.6L LBZ Duramax. It’s

EB Takeover: New Performance Automotive

New Performance Automotive owner, Steve Burton, opened his diesel shop more than 20 years ago as a way to further his passion for truck and tractor pulling. Burton moved his diesel shop in 2004 to its current location in Rural Retreat, VA into a 6,000-sq.-ft. facility where his team does general maintenance and repair work,

Reviewing Cloyes’ Race Billet True Roller Timing Set

As part of our small block Ford Dream Engine Build, we utilized a Cloyes Race Billet True Roller timing set, so we took a few minutes to give the product a review. https://www.cloyes.com/high-performance/race-billet-true-roller-timing-sets/ Related Articles – Twisted Customs’ 6.7L Cummins Engine – Intellectual Horsepower: All About Harmonic Dampers – Larry “Spiderman” McBride’s Suzuki Top Fuel

Other Posts

Graymills Tempest SWF Spray Cabinet

This cabinet allows you to clean single or multiple parts.

EB Takeover: W.O.T. Motorsports

We join W.O.T. Motorsports‘ co-owner Josh McCormack for a tour of his new diesel engine, transmission and truck maintenance/repair shop in Abingdon, VA, which he co-owns with David Petrick. Both Josh and David have been high-horsepower diesel mainstays in recent years, and the two recently joined forces to start this shop. See what they have

Reviewing Callies’ Ford Magnum Crankshaft

There’s no debating that Callies Performance Products manufactures a great crankshaft, among other engine components. We picked out a Callies Magnum Ford crank for our twin-supercharged small block Ford engine build, so we took the opportunity to review exactly what we got from Callies. Related Articles – One-on-One with Jim Dunn Racing’s Johnna Dunn – Reviewing

Twin-Turbo LB7 Duramax-Powered Z28 Camaro

At the 2022 Ultimate Callout Challenge, the Exergy booth had a Z28 Camaro parked in front. The car caught out attention, but our interest was piqued when we noticed it was a twin-turbo Duramax engine and not a gas engine sitting in the engine bay. We spoke to Lavon Miller of Firepunk Diesel, the shop