Steve Morris recently purchased a couple Rottler machines for his shop, and he took delivery of a new F69A machining center. Check this out!
Steve Morris Engines Gets a Massive Delivery!
Main Navigation
Is Lower Viscosity Oil Better?
As OEMs continue to face pressure for better fuel economy, the recommended oil in vehicles continues to move toward lower viscosities. However, are those lower viscosities better for your engine? We discuss the differences in oil viscosity and how it helps your engine in this episode of AMSOIL Garage.
As OEMs continue to face pressure for better fuel economy, the recommended oil in vehicles continues to move toward lower viscosities. However, are those lower viscosities better for your engine? We discuss the differences in oil viscosity and how it helps your engine in this episode of AMSOIL Garage.
Wilkins Racing Engines’ 347 cid Small Block Chevy Engine
Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It’s our Engine of the Week!
All About Those Valves
We recently sat down with Ryan Hamilton and Phil Data of SBI, as well as D&J Precision Machine owner Drew Pumphrey to talk about everything valves – problem areas, materials, sizes, angles, valve jobs, seats, and even springs. Check out this latest Intellectual Horsepower episode brought to you by SBI. Related Articles – Clay Millican’s
CNC Fabrication’s Turbocharged 7.3L Powerstroke Engine
During this past summer’s Ultimate Callout Challenge, we came across CNC Fabrication’s booth and got the chance to speak with owner Corey Hurtt about his business and the brand-new 7.3L Powerstroke engine they built. The engine was just finished at the time, but Corey had plans to eventually run the truck in the ODSS 5.90
Drag-and-Drive Billet Big Block Chevy Engine
Pete Harrell of Harrell Engine & Dyno in Mooresville, NC specializes in forced induction builds and “polishing turds,” as he likes to put it. He got this build extra polished, as it features a 540 cubic inch billet aluminum big block Chevy block for drag-and-drive events. Hear what else went into the build directly from
Other Posts
Engine Builder Magazine’s 2023 America’s Best Engine Shop Winners
Engine Builder magazine has announced the three winners of its 2023 America’s Best Engine Shops contest, sponsored by The ArmaKleen Company and Safety-Kleen. The three winners, Noonan Race Engineering (Race), Warren Diesel Injection (Diesel) and 955 Automotive (Vintage), accepted their awards during Engine Builder’s PRI Party, sponsored by The ArmaKleen Company and Safety-Kleen, at Tin
The CNC Landscape Continues to Grow Inside Engine Shops
Several manufacturers named automation as one of the biggest continuing trends surrounding CNC equipment these days, and it’s clearly a key contributor to a CNC machine’s ability to do more without human interference.
Pat Musi Gives a Tour of His Engine Shop and Race Shop
Any chance we get to hang with Pat Musi for a day, we jump at it. His wealth of engine and racing knowledge is seemingly never ending. We recently got to check out Pat Musi Racing Engines and Pat’s newly built race shop during our trip to Mooresville, NC. Check it out! Related Articles –
Ford 2.3L Duratec Short Block
One of the shops we visited during our Mooresville, NC trip was Poteat’s Engine Rebuilding in Kannapolis. We spoke to Andrew Seldomridge about the kinds of engines the shop typically works on and found it that they do a little bit of everything, including both gas and diesel engine work. They had a Ford 2.3L
