Aeromotive Eliminates Flow Restrictions with its First-Ever Flex Fuel Sensor Adapter - Engine Builder Magazine

Aeromotive Eliminates Flow Restrictions with its First-Ever Flex Fuel Sensor Adapter

Aeromotive’s Flex Fuel Sensor Adapter features ORB -10 inlet and outlet ports that can be adapted to any size fuel line with a dual O-ring seal for the OEM Flex Fuel sensor’s 3/8-inch tube.

Aeromotive, the leading aftermarket fuel systems and accessories manufacturer, has developed a new Flex Fuel Sensor Adapter to accommodate high-flow demands while still allowing the OEM Flex Fuel sensor to accurately read the ethanol-gasoline ratio in the fuel system at all times.

Ethanol requires 30% more volume compared to gasoline, and OEM Flex Fuel sensors commonly become a restriction point on high-flow fuel systems. The adapter allows a portion of the fuel to pass through the sensor while the remainder is diverted through a secondary channel with vastly increased flow capacity. This new sensor adapter is designed to work with OEM Flex Fuel sensors part numbers 13577429, 13577379 and 13577394, allowing fuel to flow above 400 liters per hour.

Aeromotive’s Flex Fuel Sensor Adapter features ORB -10 inlet and outlet ports that can be adapted to any size fuel line with a dual O-ring seal for the OEM Flex Fuel sensor’s 3/8-inch tube. The adapter’s body is constructed from 6061-T6 aluminum alloy with a bright-dip anodized finish and is sold preassembled as a body without the OEM sensor. Parts cannot be sold separately.

Aeromotive’s one-year limited warranty backs the Flex Fuel Sensor Adapter. Visit www.Aeromotiveinc.com for more information on it or any other Aeromotive products.

You May Also Like

Get’M Piston Cooling Kits and Jets

Installation kits are available for LS, BBC, SBC, and some Ford engines and include reusable fixtures which can be used multiple times to drill similar blocks.

Piston oilers optimizes engine cooling, boosting horsepower, increasing reliability, and enhancing performance engines longevity, while allowing for a more aggressive tune. Installing piston oiling jets in the engine block’s main webbing allows for a cooling jet to spray the underside of the piston with oil and reduce piston temperature by flowing heat away.

Calico CT-5 PTFE Coating

Calico’s CT-5 PTFE is a non-stick, oil-shedding coating for aluminum, steel, and stainless-steel substrates.

calico coating
Silver Seal’s Deluxe Valve Stem Height Gauge Set

The height gauge set includes a .001″ dial indicator with a solid billet aluminum base included and is made in the USA.

Silver Seal gauge set
Haltech Nexus Rebel LS Gen 3 and Gen 4 ECU Kits

The Nexus Rebel LS ECUs are compatible with Haltech’s plug-and-play CAN accessories.

Haltech ECU
Graymills Benchtop Ultrasonic Cleaners

These machines feature a self-enclosed design with stainless steel, corrosion-resistant tanks and lift-off covers.

Graymills ultrasonic cleaner
Other Posts
AMSOIL 0W-8 100% Synthetic Hybrid Motor Oil

This new 0W-8 viscosity is engineered for applications calling for the JASO GLV-1 specification.

AMSOIL hybrid oil
Crower EnduraMax Roller Lifters

Available in all popular sizes and comes standard with Crower’s High Pressure Pin Oiling to help keep the roller and shaft lubricated.

Crower roller lifter
Point One Chevy Oil Pump Stud Kit

Point One manufactures high-strength critical engine fasteners for aftermarket automotive, racing, and other demanding applications.

P1 Chevy oil stud kit
King HP- and XP-Series Rod and Main Bearings

King Bearings’ HP- and XP-Series bearings are available in standard size and a wide range of over- and undersizes for popular V8s.

HP-series bearings