Jesel Sportsman Roller Lifters - Engine Builder Magazine

Jesel Sportsman Roller Lifters

From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you bulletproof performance.

As with Jesel’s popular Sportsman Series rocker line, the Jesel Sportsman Series Tie-Bar Lifters offer the same Jesel quality and durability at a lower cost. From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you bulletproof performance.

These Sportsman lifters use a polished version of the same 8620 heat-treated body Jesel uses in its Pro series line and are assembled with bronze bushing cam rollers. In addition to the lifter body, the Sportsman Series lifters also share the same roller, axle, tie-bar and hardware found in the Pro Series line.

The bronze bushings used in the roller package has been durability tested through hundreds of torturous dyno pulls and over a million cycles on Jesel’s in-house Spintron. A direct pressure fed oiling circuit ensures that the bushings receive an adequate oil supply as the lifter travels through the lift cycle.

Lifters are available for select OE and aftermarket applications with a range of lifter body diameters from .842” to .905” with either offset or on-center pushrod seats. 

Standard Features

  • Heat treated Polished 8620 bodies
  • .842”, .875”,  and .905” diameter bodies
  • Heat treated Stainless Steel tie-bars
  • Bronze bushed cam rollers 
  • Pressurized oiling to the axle assembly
  • Heat treated and polished tool steel roller
  • Offset or On-Center pushrod seats

Oil flow should never be restricted to any Jesel Precision Roller Lifter. For more info:

You May Also Like

Accessory Stud Kits From ARP

All ARP fasteners are manufactured in-house at California facilities to the industry’s highest standards.

ARP’s unique accessory studs with a rounded “nut starter” nose are available for an ever-increasing variety of applications. These include specially designed studs for securing bellhousings, carburetors, distributors, headers, timing covers, valve covers and more. An important benefit of using studs is being able to accurately position gaskets and hold them in place during the assembly process.

BoostLine Connecting Rods for Nissan VQ37

The patented 3-pocket design was specifically engineered for demanding turbocharged, supercharged and nitrous applications.

Diamond Pistons’ Toyota 3UR-FE Piston Kits

Toyota’s 3UR-FE engine came to the market in 2007, and has since been a workhorse. As such, Diamond Pistons has announced a 3UR-FE piston kit.

Howell EFI Wiring Harnesses

Reprogramming of the existing ECM or ECM module supplied by Howell is required. ECM’s are reprogrammed to the vehicle’s engine and transmission specifications; i.e. gear ratios, tire size, cam changes, vehicle anti-theft (VAT’s) removal, etc. 

Precision Racing Components’ 5 Stage Sprint Car Oil Pump

The pump features a unique pressure gear design along with true helical scavenge rotors giving PRC’s oil pumps a competitive advantage.

Other Posts

PWR LSA Intercooler for 2012-’15 Camaro ZL1

Paired with PWR’s heat exchanger upgrade, this brick can support any high-horsepower build and keep your car at its coolest.

Turbosmart’s Boost Tee Manual Boost Controllers

Now featuring a 33% smaller, more ergonomic design, these boost controllers incorporate the same functionality that made it a crowd favorite.

Elgin’s LSX 376 Camshaft

Elgin has introduced two LS camshafts with its 480 Hot Cam and 515/525 ASA camshafts.

Graymills Tempest SWF Spray Cabinet

This cabinet allows you to clean single or multiple parts.