While spending a week in Florida for Sick Week 2023, we got to see a number of people we have become close with. One of those guys is Andy Starr of Starr Performance & Consulting. Andy was in attendance helping tune a few customer’s cars, including this 1967 Chevy Nova with a 421 cubic inch small block Chevy engine that belongs to Josh Norris. Josh was kind enough to give us a rundown of the build for this Engine of the Week brought to you by PennGrade1, Elring and NPW Companies.
Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.
Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.
As Steve Morris’ son, Kyle Morris is no stranger to engine work and drag racing from his seat at Steve Morris Engines. This 1996 Mustang was purchased by Kyle at the age of 15, and he now has it ready to rip 7- and 8-second 1/4-mile passes thanks to an 1,800-horsepower, twin-turbo small block Ford
The guys at MTI Racing were looking to put together a Nissan GT-R engine, but first they Magnafluxed the crank and rods, and it’s a good thing they did. To ensure parts can get reused and don’t have signs of stress and cracks, magnafluxing can save you from more expensive repairs down the road. Related
Striving to make 200-mph passes during Sick Week, we came away impressed by Tina Pierce and her Chevy II Nova, which features a twin-turbo 509 cubic inch big block Chevy engine. The race veteran was attending her first Sick Week and we got the details of her drag-and-drive setup in this episode of Engine of
In this episode of AMSOIL Garage, we dive deeper into the topic of biodiesel and biofuel, and how it can impact your diesel engine. Related Articles – Machining a Cylinder Head for Valve Seats – Part 1 – CP4 Troubles? Try Fuel Additives – 1977 Trans Am with a Twin-Turbo 461 Pontiac Engine
Owned by Scott Mueller since the 1980s, this 1934 Ford hot rod features a supercharged 406 cubic inch small block Chevy engine capable of 1,000 horsepower and low-8-second passes. Check it out!
Improve air-to-fuel flow and fuel efficiency with a Chevy 8.1L Vortec engine swap. Howell EFI, an expert manufacturer of EFI systems and components for 35 years, is answering the call for a complete wiring harness for 8.1L Chevy Vortec, (#HVL81) Big Block engine swaps that is plug and play. With symmetrical cathedral port cylinder heads and modern
This high-performance cast-iron cylinder head has been continuously improved since its introduction over 20 years ago.
It’s tough to beat the lines and looks of a Chevy Nova. Jason Sack’s 1969 Nova is certainly up there in terms of coolest-looking, and it doesn’t hurt that it has 2,200+ horsepower under the hood courtesy of a turbocharged and nitrous-boosted 429 cid LSX engine! See for yourself!
