UEM Sport Compact Performance Pistons - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

UEM Sport Compact Performance Pistons

UEM's Sport Compact Performance Pistons feature three levels of performance and are offered in 2618 or 4032 alloy.

Engine Builder
By Engine Builder

UEM’s Sport Compact Performance Pistons feature three levels of performance. The Premium features polished crown, anti-friction skirt coating, dual forced pin oiling, and 2618 or 4032 alloy. Elite features include hard anodized crown and top ring groove, anti-friction skirt coating, lateral gas porting, and 2618 alloy. And the Extreme offers hard anodized crown and top ring groove, abradable skirt coating, thermal heat barrier, and 2618 or 4032 alloy.

Related Articles

Premium piston part numbers end in “C” or no letter. Elite piston part numbers end in “CA.” While Extreme piston part numbers end in “LCAT.” For more info: https://www.uempistons.com

You May Also Like

Products

Waterman Racing Components High-Flow Canister-Style Fuel Filter

Waterman Racing Components, the premier manufacturer of racing fuel systems and accessories, has introduced its all-new High-Flow Canister-Style Fuel Filter to provide effective fuel filtration at 40 GPM with minimal pressure drop while minimizing its physical footprint. In-line fuel filters are effective, but as flow rates climb, filter length must increase, becoming a limiting factor.

Engine Builder
By Engine Builder

Waterman Racing Components, the premier manufacturer of racing fuel systems and accessories, has introduced its all-new High-Flow Canister-Style Fuel Filter to provide effective fuel filtration at 40 GPM with minimal pressure drop while minimizing its physical footprint.

In-line fuel filters are effective, but as flow rates climb, filter length must increase, becoming a limiting factor. This all-new canister-style filter provides maximum flow while minimizing size. While this filter was designed and engineered specifically to pair with Waterman Racing High-Flow Mechanical Fuel Pumps, it is purpose-built to allow extremely high flow rates with minimal pressure loss for any fuel system. The canister-style housing provides a vertical filter mount to ease mounting in tight engine bays while maintaining a large element surface area for extreme flow capability.

Read Full Article

More Products Posts
Manley Turbo Tuff Tri-Beam Rod For Lamborghini and Audi V10

Manley’s Turbo Tuff Tri-Beam rods are ideally suited to high-boost turbocharged and nitrous oxide assisted applications.

By Engine Builder
World Products Sportsman II Small Block Chevy Cylinder Heads

This high-performance cast-iron cylinder head has been continuously improved since its introduction over 20 years ago.

By Engine Builder
Erson Diesel Performance Valves

New valves from Erson Cams are designed for high performance diesel applications. Intake valves are made from 21-4N stainless alloy and exhaust valves are Inconel alloy with a stellite facing for maximum durability under the extreme heat and stress produced by turbocharged and supercharged diesel engines. Related Articles – Trend Performance H-Series Pushrods – CP-Carrillo

By Engine Builder
Trend Performance H-Series Pushrods

The new H-series pushrod solid design is available for all pushrod race engines operating under extreme stresses that do not oil the rocker balls through the pushrods.

By Engine Builder

Other Posts

Diesel Piston Technology

Diesel and heavy duty go hand-in-hand. There’s no way around it. High compression causes high cylinder temperatures, with peak cylinder pressure often as high as 2,700 psi (or higher). This high pressure and high heat only have one thing in mind, to beat relentlessly on the first thing to get in the way – the pistons.

By Eric Garbe
Klotz COXOC Top-Treat Fuel Oxygenator

Klotz COXOC is a top-treat fuel oxygenator that improves engine performance, especially under low and mid-range rpm.

By Engine Builder
Proflow SuperMax+ Billet LS Intake Manifold

Billet CNC LS intake manifold kit, SuperMax Plus, for Holden Commodore LS3/L92. Features a 102mm bore in gloss black.

By Engine Builder
Tomei Forged Billet Crankshaft for Nissan VR Engine

Tomei’s forged, billet, five-counterweight crankshaft for the VR38DETT Nissan engine.

By Engine Builder