In this episode of AMSOIL Garage, we dive deeper into the topic of biodiesel and biofuel, and how it can impact your diesel engine.
What’s the Deal with Biodiesel and Biofuel?
Main Navigation
Mild vs. Wild (Diesel Edition) Ep 5 – 6.7L Powerstroke Builds
Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.
Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.
Kyle Morris’ Twin-Turbo Small Block Ford Engine
As Steve Morris’ son, Kyle Morris is no stranger to engine work and drag racing from his seat at Steve Morris Engines. This 1996 Mustang was purchased by Kyle at the age of 15, and he now has it ready to rip 7- and 8-second 1/4-mile passes thanks to an 1,800-horsepower, twin-turbo small block Ford
Why You Should Magnaflux Your Engine Parts
The guys at MTI Racing were looking to put together a Nissan GT-R engine, but first they Magnafluxed the crank and rods, and it’s a good thing they did. To ensure parts can get reused and don’t have signs of stress and cracks, magnafluxing can save you from more expensive repairs down the road. Related
Tina Pierce’s Twin-Turbo 509 cid Big Block Chevy Engine
Striving to make 200-mph passes during Sick Week, we came away impressed by Tina Pierce and her Chevy II Nova, which features a twin-turbo 509 cubic inch big block Chevy engine. The race veteran was attending her first Sick Week and we got the details of her drag-and-drive setup in this episode of Engine of
What Goes Into Steve Morris Engines’ SML Heads?
Watch as Steve Morris walks you through aspects of his new SML platform, including a look at the transformation the cylinder heads go through from a solid chunk of billet aluminum to a finished product. Related Articles – Machining a Cylinder Head for Valve Seats – Part 1 – CP4 Troubles? Try Fuel Additives –
Other Posts
Turbocharged 12-Valve Cummins Engine
Guys like Cody Helms of HDP Performance prove that being competitive in diesel motorsports doesn’t have to be a pocket-emptying hobby. His 12-valve Cummins build made enough power for him to race competitively in the 5.90 class at UCC this year. Check it out!
Twin-Charged 3.0L EcoDiesel Engine
The 3.0L EcoDiesel is known for its incredible fuel economy and low-end torque, not necessarily for its high-horsepower capabilities. But that won’t stop some from building a formidable Pike’s Peak race engine with both turbocharging and supercharging. Check it out!
Single-Turbo LBZ Duramax Engine
This LBZ Duramax came from a donor truck Josh Kaye had purchased at an auction. After bringing it home, he tore everything apart and started building it back to the 850-horsepower state it sits at currently. Check it out!
Nitrous Update
The use of nitrous oxide in diesel engines is not a new concept. In fact, it has been used in drag racing for decades. However, it is only in recent years that it has gained widespread popularity in the worlds of diesel truck pulling and drag racing. Now, it seems as if almost everyone in the competitive scene is using it.
