Diamond -2K Series Pistons for 6.2L and 6.4L Hemi Engines - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

Diamond -2K Series Pistons for 6.2L and 6.4L Hemi Engines

These Hemi pistons are made from 2618 material for high horsepower, boosted applications and are rated for 2,000 HP.

Engine Builder
By Engine Builder

Diamond’s Hemi -2K Series for 6.2L and 6.4L Engines provide a variety of features. Included are 3D milling on piston crowns for ready to install finish; Inboard forging design with fully machined under crown for maximum strength; Valve pockets designed to work with 6.2L Hellcat cylinder heads; Side gas ports for better ring seal; Moly skirt coating for friction loss and skirt wear protection, and more.

Related Articles

These pistons feature a top ring down dimension of .250″ 1.050cd .300″ 1.275cd. The ratios are figured for a .040″ head gasket @ 9.280″ deck. Each piston set features a premium 1.5mm x 1.5mm x 3.0mm ring package and premium H-13 .250W wrist pins chamfered for round wire locks. The valve pocket depth is 0.130″ intake and sym exhaust.

These Hemi pistons are made from 2618 material for high horsepower, boosted applications and are rated for 2,000 HP. For more info: https://diamondracing.net/

You May Also Like

Products

Edelbrock Pro-Flo 4 Plus Engine Management System

Edelbrock’s Pro-Flo 4 Plus Self-Learning Engine Management System makes it easier than ever to swap a Gen III Hemi into your classic Chrysler, Dodge, or Plymouth car or truck. The self-learning ECU adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. You can use the

Engine Builder
By Engine Builder

Edelbrock’s Pro-Flo 4 Plus Self-Learning Engine Management System makes it easier than ever to swap a Gen III Hemi into your classic Chrysler, Dodge, or Plymouth car or truck. The self-learning ECU adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. You can use the E-Tuner 4 Plus software to do real-time system programming, calibration adjustments, and performance monitoring with an Android tablet or smartphone. 

Read Full Article

More Products Posts
Jesel Camshaft Belt Drive Systems

Built with the finest materials available, our Camshaft Belt Drives feature several performance and valve train stability enhancements over traditional timing chains and gear drives. The Gates patented High Torq Drive™ reinforced belt spins dry on a steel crank pulley and a hard coated aluminum upper pulley and helps isolate crankshaft harmonics to the valve

By Engine Builder
Hot Shot’s Secret Introduces Adrenaline R82+ Competition Diesel Performance Additive

Hot Shot’s Secret extends the company’s Adrenaline® Racing product line with a new competition diesel performance additive – ADRENALINE R82+™. Formulated for competitive off-road vehicles, ADRENALINE R82+ combines a powerful cetane improver with Hot Shot’s Secret’s new ADRENALINE Racing Top Lube fuel lubricant to decrease wear by up to 41% in ASTM testing. The result is a diesel

By Engine Builder
Reid Machine’s 392 Shoe Rocker

The design of Reid Machine’s rocker arms provides the stability required in Top Fuel, Blown Alcohol, Injected, Fuel, and Pro Mod categories.

By Engine Builder
COMP Cams HRT Camshaft for Gen III Hemi

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life.  Related Articles – Silver

By Engine Builder

Other Posts

Turbocharged 5.9L 12-Valve Cummins Engine

Logan Yelton’s ’93 Dodge has gone through quite the transformation. It was once used to transport him and his wife to prom back in the day to now burning rubber on the drag strip with 1,800 horsepower on command. This 5.9L 12-valve Cummins-powered monster has done it all. See what went into the build!

By Evan Laux
Tales of NHRA Drag Racing with Clay Millican’s Crew Chief Jim Oberhofer

Better known by many as simply Jim O, we got the chance to speak with Jim Oberhofer, Clay Millican’s NHRA Crew Chief with Rick Ware Racing, during a visit to Pro Motor Engines in Mooresville, NC earlier this year. Jim O was there along with another member of Clay’s team as one of the team’s

By Greg Jones
731 cid Outlaw 4.840 Bore Space Nitrous Engine

When it comes to building a 4.840″ bore space engine for drag racing, the class is limited on deck height and limited on bore space, but anything else pretty much goes. Pat Musi of Pat Musi Racing Engines recently finished development on his state-of-the-art 4.840 engine platform, and this 731 cid nitrous combo is freaking awesome!

By Greg Jones
Pat Musi Racing Engines’ Outlaw 4.840 Bore Space Nitrous Engine

We love every opportunity we get to speak with Pat Musi of Pat Musi Racing Engines. This time, we were down in Mooresville, NC to check out his shop in person and get the details of a few engine builds he had underway. This is an Outlaw 4.84 nitrous engine with 731 cubic inches of

By Greg Jones