Tech Line's Polyphen Piston Top Gold Thermal Barrier - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

Tech Line’s Polyphen Piston Top Gold Thermal Barrier

This thermal barrier requires oven curing at 300°F for 1 hour and is for professional applications.

Engine Builder
By Engine Builder
Published:

Polyphen Piston Top Gold Thermal Barrier was originally developed for top fuel drag racing engines. It reduces heat penetration on coated parts and can be used on any combustion chamber surface in any type of engine. It also evenly distributes heat, reduces hot spots, aids in flame travel and combustion, while reducing the amount of heat the incoming air/fuel mix absorbs, reducing the potential for detonation. 

Related Articles

This thermal barrier also sheds carbon, reduces carbon buildup, is solvent based, and cleans up with Acetone or similar. Requires oven curing at 300°F for 1 hour. Part #TL-PTG available in Quart & Gallon. For professional applicators only.

For more info: https://techlinecoatings.com/new-internal-engine-coatings/

You May Also Like

Products

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Read Full Article

More Products Posts
Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

By Greg Jones
LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

By Greg Jones
Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

By Greg Jones
Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

By Greg Jones

Other Posts

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

By Greg Jones
Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

By Greg Jones
Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

By Greg Jones
Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.

By Greg Jones