Summit Racing Pro Hemi Camshafts - Engine Builder Magazine

Summit Racing Pro Hemi Camshafts

The Pro Hemi Camshafts are precision ground in the USA from high-quality bearing steel billet cores and finished on modern Landis CNC grinders.

If you’re on the hunt for a new camshaft for your 2009 and later 5.7L-6.4L Mopar Gen III Hemi, Summit Racing has you covered. The Pro Hemi Camshafts are precision ground in the USA from high-quality bearing steel billet cores and finished on modern Landis CNC grinders. A broad range of styles and profiles will suit everything from removing MDS on stock engines to high-rpm racing engines and everything in between.

Summit Racing Pro Hemi Non-MDS Camshafts

Say goodbye to repeated lifter failures, misfire codes, and valvetrain noise from failing MDS components with a Summit Racing Pro Hemi Non-MDS Camshaft. They are available individually or in Summit Racing Gen III Hemi MDS Delete Kits that include lifters, gaskets, and all the other components you’ll need to completely remove MDS from your vehicle’s engine. 

Summit Racing Pro Hemi Truck Camshafts

Available for 5.7L and 6.4L engines, the Pro Hemi Truck Camshafts are for folks who want to hot rod their daily driver truck or SUV. Stage 1 cams work well with trucks that tow often. Stage 2 cams makes great midrange, good top end, and have a steady lope. Stage 3 cams deliver strong midrange and top-end power. All Pro Hemi Truck cams work with the factory torque converters. 

Summit Racing Pro Hemi Automotive Camshafts

Wake up your Charger or Challenger with these cams that are available in durations ranging from 206 to 232 degrees at .050″ and .585″ to .625″ valve lift. They deliver maximum naturally aspirated power but also work well with well with superchargers and nitrous.

Summit Racing Pro Hemi Supercharged Camshafts

Pro Hemi Supercharged Camshafts have ramp profiles that are fine-tuned to deliver maximum power in 6.2L Hellcat supercharged engines. Stage One and Two cams have a noticeable lope and deliver great power through the entire RPM range. The Stage Three cam delivers a strong, steady lope and heaps of power through the midrange and top end.

Summit Racing Pro Hemi Turbo Camshafts

Pro Hemi Turbo Camshafts are specially tuned to enhance the flow of exhaust gases for quicker turbo spool-up. The cams are available in durations ranging from 218 to 232 degrees at .050″ and up to .625″ of valve lift.

Summit Racing Pro Hemi Big Gun Camshafts

Thanks to their highly aggressive profiles, Pro Hemi Big Gun Camshafts shine at making maximum power at high rpm. These race cams pack between 232 to 251 degrees duration at .050″ and up to .625″ of valve lift to deliver gobs of power up to 8,000-plus rpm. They also provide excellent valvetrain stability with performance valve springs and OEM rockers and shaft supports. You’ll need to step up to aftermarket forged pistons with valve reliefs when using these cams. 

For more info: www.SummitRacing.com or 1-800-230-3030

You May Also Like

Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

Back in the day, most vehicle manufacturers built engines with cast pistons. However, adding high-performance parts and spinning your engine to higher rpms can spell doom for the stock cast slugs. That’s why your high-performance engine build needs Summit Racing Forged Pro Pistons. Combined with a Summit Racing forged crankshaft and performance connecting rods, you can save a whole bunch of money making a whole bunch of horsepower! 

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Other Posts

Turbocharged Billet K24 Honda Engine

Noonan Race Engineering is well-known for its V8 engine platforms, but the shop has now dipped its toe into the 4-cylinder world with a billet K24 Honda engine. The objective – huge horsepower, while keeping factory creature comforts. Check it out!

Deep Dive on Lifters with Hylift Johnson

What engine builders, assemblers and DIYers need to watch out for.

Lifters
Noonan’s New Billet K24 Honda Engine

We aren’t trying to hide the fact that we’re impressed by what Noonan Race Engineering is capable of. That’s why we will always jump at the chance to highlight what NoonanRaceEngineering has coming down the pipeline, and the shop’s latest endeavor is a billet K24 Honda engine, which was showcased at the 2023 PRI Show. We caught

Noonan Race Engineering Honda engine
Paul Vasko’s LML Duramax-Powered Diesel Dragster

During our weekend at the 2023 Ultimate Callout Challenge, there were plenty of fun conversations, but speaking with drag racer Paul Vasko was definitely a highlight. His passion is contagious, and his diesel dragster is definitely badass, thanks in part to a turbocharged LML Duramax engine. It’s our Diesel of the Week brought to you

Paul Vasko LML Duramax