You searched for 4Runners - Engine Builder Magazine
SEMA Announces 10 Schools for its 2019-2020 Build Program

Over the course of the semester, students will gain hands-on-experience with aftermarket products, instilling them with skills in project management, installation, body-styling and team building.

SEMA High School Program Expands From 1 to 10 in Two Years

The SEMA High School Vehicle Build Program, now entering its third year, will provide 10 high schools with hands-on-learning opportunities and expose hundreds of students to the $44.6 billion automotive specialty equipment industry.

Front Timing Cover Oil Leak Reported on Toyota 1GR-FE Engine

Oil leaks have been reported on some 2003-2007 Toyota 4Runners and FJ Cruisers with the 1GR-FE engine. Some 2003 – 2007 model year 4Runner, FJ Cruiser vehicles with 1GR-FE engines may display evidence of a small oil leak located where the Bank 1 cylinder head, engine block, and timing cover meet. Use the following repair

Toyota 3VZ Cylinder Head Installation Procedures

Affected Models/Engines: 1988-1995 Toyota Trucks, 4Runners and T100s equipped with the 3VZ V6 engine. The cylinder head bolts are tightened in three progressive steps: 1. Install cylinder head a. Place a new cylinder head gasket on the engine block and install cylinder head. b. Apply a light coat of engine oil on the threads and

Uncovering the Culprits That Cause Head Gaskets to Fail

Most installers should know the first symptoms of a head gasket that is failing are usually a slowloss of coolant with no visible leaks, engine overheating and/or aCheck Engine light with cylinder misfire codes. The Onboard DiagnosticII (OBD II) system should detect any misfires that occur due to a lossof compression or spark plugs fouled