Tech Center
Changes to the timing chain and oiling nozzle on 2000-’03 Saturn 2.2L VIN F engines
Engine Builders: The AERA Technical Committee offers the following information regarding changes to the timing chain and oiling nozzle on...
September 2021
August 2021
July 2021
Engine Builders: The AERA Technical Committee offers the following information regarding changes to the timing chain and oiling nozzle on...
What is the bedplate torque sequence for a Chrysler 4.7L? My manual doesn’t seem to list all the fasteners. The...
Engine Builders: The AERA Technical Committee explains that turbocharger oil passing and spilling from cylinder head cover-mounted breather on Mack...
When can I reuse connecting rods for Mercedes-Benz M111 engines? If you’re rebuilding Merecedes connecting rods for resale or reuse,...
A full-line of flat mechanical tappets, lash adjusters and encapsulated hydraulic roller lifters are again being produced by the original...
Engine Builders: The AERA Technical Committee offers the following information regarding a front engine oil leak on 1999-2003 Suzuki 2.5...
The AERA Technical Committee says that loss of engine coolant has been reported on 1997 Toyota 2.2L 5SFE engines in...
Engine Builders: The AERA Technical Committee offers the following information regarding valve stem seal identification for 1992-2002 Lexus 3.0L engines....
A. We have all seen the thrust bearing failures in the Ford 302/5.0L engine applications. Many if not most of...
The engine rebuilding aftermarket continues to change, from the manufacturer through the distribution channels and down to the machine shop...
Engine Builders: The AERA reports the following valve lifter caution on 1994-2002 Chrysler 8.0L VIN E & W, V10 engines....
It has recently been announced that there are oversize outside diameter cam bearings available for 1985-2003 Cummins L10 & M11...
Engine Builders: The AERA Technical Committee offers the following information that may help installers diagnose and repair repeated heater core...
The AERA Technical Committee warns that engine damage may result if some of the special markings found on 1994-2002 Chrysler...
When Jay Steel was introduced to the assembled throng at last spring’s AERA International Expo 2003 as the winner of...
Engine Builders: The AERA Technical Committee offers the following information for head gasket selection for Toro Groundmaster and Roadmaster units...
If you rebuild model year 2003 GM 4.8L, 5.3L or 6.0L VIN V, T and U truck engines, your customers...
Engine Builders: The AERA Technical Committee offers the following information on a revised cylinder head installation procedure for 1997-2002 GM...
Some service manual information regarding camshaft timing for 1997-2003 Ford 4.0L VIN E engines is erroneous. Ford published the correct...
Engine Builders: The following information regards cylinder liner adjustment and compression ring gasket thickness for Detroit Diesel Corporation (DDC) 71...
