Video Archives - Page 7 of 62 - Engine Builder Magazine
Pat Musi Racing Engines’ Outlaw 4.840 Bore Space Nitrous Engine

We love every opportunity we get to speak with Pat Musi of Pat Musi Racing Engines. This time, we were down in Mooresville, NC to check out his shop in person and get the details of a few engine builds he had underway. This is an Outlaw 4.84 nitrous engine with 731 cubic inches of

Wilkins Racing Engines’ 632 cid Big Block Chevy Nitrous Engine

Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built

Cancer Sucks S10 with a Compound Turbo 5.9L Cummins Engine

It’s hard to miss Stainless Diesel’s #CancerSucks S10, which features a compound turbo 5.9L Cummins engine. During the 2023 Ultimate Callout Challenge, we caught up with Steve O’Neal to get the details of this special truck and it’s Cummins powerplant for our Diesel of the Week.

Harrell Engine & Dyno’s 2,500+ HP Turbocharged 448 cid Billet LS Engine

We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing

Pro Motor Engines’ LS3 Engine Build for TA2 Racing

Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the

Harrell Engine & Dyno Shop Tour

During our week in Mooresville, NC, we couldn’t leave town before visiting Pete Harrell and his shop, Harrell Engine & Dyno. We stopped by to see what engines Pete was building, what cars he was tuning and what other cool things he was working on. He was kind enough to give us the full tour.

How to Clean a Direct Injection Cylinder Head

Cylinder heads can pretty dirty over time. They get filled with carbon and other deposits that can eventually rob your engine of airflow, fuel and power. For that reason, cleaning cylinder heads is an important thing to do on a performance engine, especially if you have a direct injection head. Danny talks about techniques for

Gibbons Motorsports’ 598 cid Big Block Chevy Engine

When an engine builder is spec’ing a build for himself, it typically gets all the bells and whistles. Just check out this 598 cubic inch big block Chevy build done by Gibbons Motorsports for co-owner Jake Gibbons. We spoke with Pete Gibbons, Jake’s older brother and co-owner of the shop, about the details of this

Jason Sack’s SML Engine Goes on the Dyno and Back in His Nova

With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova.

Assembly of a Steve Morris Engines SML for Jason Sack – Part 2

Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled.

Jason Sack’s Cowboy Up Nova Gets Steve Morris Engine’s SML – Part 1

Jason Sack’s Cowboy Up Nova was already a formidable drag-and-drive streetcar capable of 200 mph 7-second quarter mile ETs and 2,200 horsepower. However, the quest for more power and performance is never done, and that’s where Steve Morris Engines comes in and the new SML engine platform. Watch as Steve readies an SML for Jason’s

A Better Way to Remove Valve Springs

Danny Soliz of Hill Country Performance & Machine has a lot of tricks up his sleeve to make engine work a little easier. He’s great at working smarter not harder, and in this latest video he shows you a great way to remove valve springs and keep some of those valvetrain components organized.