Updating The Asian Import Engine Market: The Learning Curve For Part Identification
"The learning curve for part identificationis awesome" says Bob Gibson as he describes the difficultiesof imported engine core identification. As vice president forsales and marketing at Engine Masters, Inc., a Dallas, TX, productionengine rebuilder, Gibson knows that the demand for import enginerebuilding is growing, and that he’ll do what it takes to be apart of
Mopar Engine Platforms – 318, 360
Chrysler Corp. hasn’t built a rear wheel drive, V8-powered car (with the exception of the Viper) since the turn of the decade. And the cars that harbored V8s beneath their hoods during the late 1980s were about as appealing to performance enthusiasts as the front-wheel driven vehicles that replaced them. In spite of that fact,
Motor Service, Inc.: Brian Casey, Incoming Engine Rebuilders Association (Aera) Chairman
What do you do after graduating from WorcesterPolytechnic Institute in Worcester, MA, with a degree in managementengineering? Why, run a heavy duty machine shop and service repairbusiness, of course. Well, maybe not always. But that is the wayit has turned out for Brian Casey, incoming Engine RebuildersAssociation (AERA) chairman and one of the guiding hands
Cylinder Bore Honing: Main Objective When Refinishing The Cylinders
When an engine is rebuilt, the cylinders usuallyneed attention. Wear tends to create taper in the upper part ofthe cylinder that can reduce ring sealing and increase blowbyand oil consumption if not removed. The cylinder may also be outof round, scored or have other damage that requires correctingbefore a new set of rings will seal
Small Engine Performance
Most businesses have the same problems and each must look for ways to remain competitive by reducing costs and exploring new markets for existing products or services. And so it is in engine building. There is always someone that is able to provide more features per dollar than you (or at least make someone believe
The Nitty Gritty On Small Parts Cleaning: Many Ways To Clean Small Engine Parts
Tom Nichols, CEO and president of AutomotiveMachine & Supply, Inc., Fort Worth, TX, said availabilityis most often the key to why his shop cleans and reuses smallparts. Nichols said each day his shop cleans and reuses many smallparts, including valve locks, shims, springs, retainers, rockerarm assemblies, cam bore caps, nuts, bolts, etc. "Becausewe only
Understanding Alternator Current Output
The amount of electronic and electrical equipment in today’s cars has increased exponentially over the past decade and we can look forward to even more in the near future. The demands for electrical power are increasing and, consequently, greater output currents are needed from the alternator. In this article, we will examine what determines the
Desert Engine Reman Expands in the West
Since the early years of the United States, the West has alwaysprovided young pioneers a chance at adventure and the freedomto expand our nation. For Jonathan Smith, president of the ProductionEngine Remanufacturers Association (PERA), the passion for expansionfound in the hearts of those heading west is also a key elementin operating his own successful business.
Why Parts Get Coated
I never would have believed you could get those kind of resultsfrom a glorified paint job. With those words, another skeptic(in this case, a NASCAR Winston Cup engine builder) had come toaccept the value of special coatings applied to engine components. At the time, such skepticism was not totally unwarranted. Likeany emerging technology, the coating
Performance Marine Engines – Meeting Customer Expectations
Life is a series of compromises. Human relations almost alwaysinvolves compromises of some sort. You want Chinese for dinner,she wants Italian; something has to give. Even if you go yourseparate ways, it’s a compromise and a decision to not dine together. Believe it or not, it’s the same with machinery. Any exercisein design is a