You searched for Crower Cams - Page 2 of 4 - Engine Builder Magazine
Twin-Turbo 509 cid Big Block Chevy Engine

Just one of only a few women competing at Sick Week this year, Tina Pierce of Tina Pierce Racing had her 1966 Chevy II Nova dialed in. Thanks to a twin-turbo 509 cid big block Chevy engine, the car ran some personal bests and nearly cracked the 200 mph mark. Check it out!

Import Engines: A Look at the 2JZ

Many of the biggest names in motorsports have built and used the 2JZ in their own racing machines, proving that the engine platform can be competitive in various formats.

Twin-Turbo 400 cid LS Next Engine

Achieving five consecutive days of mid-6-second passes and 1,000 miles driven on the street earned Michael Westberg the 2023 Sick Week overall win. His Chevy S10 features a 400 cubic inch twin-turbo LS Next engine. See what’s in this engine build done by ACE Racing Engines!

Twin-Turbo 429 cid Ford Boss Engine

Earl Schexnayder of Schexnayder Racing is a Ford guy through and through. As such, he has been entering drag-and-drive events with his 2000 Cobra Mustang and a twin-turbo 429 Ford Boss engine since 2011. Check out what makes this Ford combo a sweet one!

Twin-Turbo 540 cid Big Block Chevy Engine

Glenn Hunter has owned this 1956 Bel Air since he was in junior high school in 1979. Today, the car features a twin-turbo 540 cid big block Chevy engine and has been a certified drag-and-drive beast since 2010. Find out what helps this 7-second car get down the track!

88mm Turbocharged 383 cid Gen II LT1 Engine

We recently got to catch up with Tyree Smith of TyTech Performance during the Summit Midwest Drags at Edgewater Motorsports Park where the drag-and-drive event kicked off. Tyree was there to support a few customers as well as compete with his own 1987 Chevy Camaro Berlinetta powered by a turbocharged 383 Gen II LT1 engine. Check it out!

Blown 540 cid Hemi Engine

Jarrad Scott and his 1962 Ford Ranchero named Bitchin’, are no strangers to drag-and-drive events. Nor are they strangers to winning in the A/Gas class. That’s all thanks to a well-built car with an impressive, blown 540 cid Hemi engine! Check out what’s under this hood!

Blown 598 Big Block Chevy Engine

Royce Payton’s 1965 GT350 Mustang is one of those cars that actually looks as good as it sounds and sounds as good as it looks. That’s in large part thanks to its blown 598 big block Chevy engine. Check it out!

Triple-Turbo Billet 5.9L 12-Valve Cummins Engine

Sick and tired of increasing horsepower only to have another cast iron block blow up, Richard Mead of RPS Diesel, went looking for a solution. He helped design a billet 5.9L block that would do the trick, and built this triple turbo billet 5.9L 12-valve Cummins engine, which is one of the fastest diesels in the Northern Hemisphere.

ASCS 360 Sprint Car Engine

Salina Engine located in Salina, KS is a shop strictly focused on racing engines. Its primary market is Sprint Car engines, but it also works on Dirt Modified, Dirt Late Model, Dirt Stock Car, and NHRA Super Class engines. Many people familiar with Salina Engine can identify the shop’s work due to its signature look

588 Big Block Chevy Marine Engines

Hameetman Racing Engines (HRE) in Cape Coral, FL, has a customer located in South Africa with two 50-foot Nortech Cat boats the shop has serviced for years. The boats each house four engines, and this time around, due to saltwater damage and years of use, all eight engines needed to be replaced.

541 cid Bracket Race Engine

Brothers Rodney and David Butler continue to up the game at Butler Performance, an engine shop their father started. You don’t need to look much further than this 1,100 horsepower 541 cubic inch Bracket Race engine for proof. Find out what went into the build – you might even be able to buy it.

388 cid Whipple-Supercharged LS7 Engine

Unable to afford a COPO Camaro, Bob Reinhardt of Madcap Racing Engines decided to build an even better version. It’s a 388 cid LS7-based engine with a 4.0L Whipple on methanol fuel – and it’s injected. It’s pretty cool, and Bob expects to make around 2,000 horsepower. Find out what makes the build unique.

Roots Blown 540 cid Big Block Chevy Engine

With a focus on early generation small block and big block Chevy builds, David Coté of Hilltoppers Speed Shop particularly enjoys building roots-blown big block Chevy street engines. Who can blame him? Just check out this roots blown 540 cid big block Chevy the shop recently built for a street rod.

Turbocharged Gen V 454 cid Big Block Chevy

After building more than 700 engines in his career, Joshua Gomez of MotorVation Performance, wanted to build himself an engine that was affordable, fast and stayed together. He hot rodded this 454 cid Gen V big block Chevy to the tune of 1,800 horsepower. Find out what went into the build!

Monster Truck Engines & the Laws of Physics

These 1,500 horsepower trucks break the laws of physics at every show by launching 12,000 lbs. 40 feet in the air and performing mind-blowingly outrageous stunts and acrobatics.

Engine Masters Challenge 439 cid LS7 Engine

Looking to expand his engine building resume and compete with the big boys, Justin McLendon set out to show what a few guys from SAM Tech could do at an Engine Masters Challenge dyno competition. Find out what went into this 439 cid LS7 engine that placed runner up in the 2019 Engine Masters Challenge Extreme LS class.

427 cid Twin Turbo LSX Engine

After a rod went through the block of this LSX engine, the customer came to Hustler Race Engines for a rebuild. Shop owner Nick Bougeokles found some serious issues with the prior build and not only remedied those issues, but rebuilt this 427 cid twin turbo LSX better than it was before. Find out what went into the build of this sand rail LSX engine!

LS Engine Parts Selection

People in the aftermarket thought that the SBC could never be replaced, but in the eyes of many hot rodders and engine builders, the heir to the throne is the LS platform.

Offshore Marine Engines

While offshore racing has widely been known as a ‘rich man’s’ sport, today, more people than ever are getting involved, making the offshore engine market one of great opportunity for engine builders.