Turbocharged 6.7L Cummins Engine
Jonathan Montesino has been building and campaigning his Ford Ranger for years, and with a turbocharged 6.7L Cummins under the hood, it now boasts a 4.23-second ET at 175 mph.
The Best of Both Worlds: Twin-Charged Engines
Not to be confused with twin-turbocharging, twin-charging is the innovative combination of a supercharger and a turbocharger. It’s nothing new – Lancia, Nissan and Volkswagen were among the first to use the combination back in the ‘80s, but it’s hardly common today.
Rebuilding Chevrolet’s Gen VI Big Block Engine
Following Chevy’s introduction of its popular small block V8 in 1955, the OEM needed something larger to power its medium-duty trucks and the heavier cars that were
on the drawing board at the time. Enter the big block!
Howell EFI 8.1L Chevy Vortec Engine Swap Wiring Harnesses
Improve air-to-fuel flow and fuel efficiency with a Chevy 8.1L Vortec engine swap. Howell EFI, an expert manufacturer of EFI systems and components for 35 years, is answering the call for a complete wiring harness for 8.1L Chevy Vortec, (#HVL81) Big Block engine swaps that is plug and play. With symmetrical cathedral port cylinder heads and modern
Complete Engine Packages
In today’s world of supply chain disruptions, it is a big benefit to be able to source an entire engine system and not have to wait for that last back-ordered component to arrive.
Facts About Engine Bearings
The experts all agree that cleanliness is the most important factor during installation, and the lack thereof is the most common problem that leads to bearing failure. But measuring is just as critical.
New Fuel Rail Products From Radium Engineering
Radium Engineering has released several new products over the last two months. Take a look below to see what’s new. All products are in stock and available for purchase right now.
Honda Performance Development Announces Talon Crate Engine
Honda Performance Development (HPD) has announced the expansion of its crate engine portfolio to include the Talon Crate Engine for off-road Talon racers. The same engine that propelled the Honda off-road Factory Racing team to victory at the 2022 King of Hammers (UTV Stock NA Class) is now available to the public. The Talon Crate
Building Big Block Marine Engines
Find out what it takes to build a formidable marine engine.
Developing a Honda 2.3L Engine for Road Racing
One of the most important aspects of engine building has nothing to do with the engine at all. You have to understand the customer and what they are trying to achieve.
The Undying Mystique of Nissan’s RB26 Engine
With all the winning and global interest, the RB platform saw an incredible amount of growth in aftermarket support and OE performance applications. Nissan produced one of the biggest icons ever to hit the racing scene!
Building a 6.0L LS Engine
What’s more legendary than the LS engine? With over 20 years in production, the LS has become the chosen V8 for many an engine builder. This article dives into what you’ll need consider when building a high-performance 6.0L LS engine.
High Horsepower Engine Sealing
In the context of high-horsepower engine building, the pressure on a cylinder head can be so great that it can, in effect, marginally push it away from the engine block. This makes engine sealing one of the more prevalent challenges, and it gives whole new meaning to the phrase “keep your head down.”
Holley Mid-Mount Complete Accessory Drive System For GM Gen-V LT Engines
Holley’s Mid-Mount complete accessory system has all the accessories pulled in tighter than other accessory drives.
5th Gen 6.7L Cummins Engine
While walking through the Piston Powered Auto-Rama, we met Twisted Customs owner Zach Carpenter and got to check out his 5th Gen 6.7L Cummins-powered Dodge Ram. See what this engine is all about!
Pat Musi Racing Engines to Host Open House at New Race Facility
Pat Musi Racing Engines and Musi Racing will celebrate the grand opening of their new race facility and the Edelbrock Race Center in Mooresville, North Carolina, with an open house event on Saturday, April 30. Fans will have the opportunity to tour the two facilities, including the new Edelbrock Race Center, home to Pat Musi’s restoration-mod
Compound Turbo 6.0L Powerstroke Engine
Tyler Brancifort of North Coast Diesel Performance knows a thing or two about Powerstrokes. After all, he’s been driving Ford trucks since he was a teenager. When it came to his own compound turbo 6.0L Powerstroke he built for his ’06 F-350 race truck, he didn’t hold back on the build. Check it out!
CPR Engines
CPR Engines and Coast High Performance are two shops that do high-quality engine work in a shared 12,000 sq.-ft. space in Gardena, CA. The facility features a machine shop, an engine shop, an engine dyno and chassis dyno, overflow storage, a metal working area, and three installation bays.
Hooker BlackHeart LS and LT Engine Mounting Brackets
Hooker BlackHeart application-specific LS/LT swap engine mounting brackets for 1988-1998 GM C1500/K1500 (2WD and 4WD 1/2-ton Truck) eliminate the installation guesswork and compatibility uncertainty that comes with using universal swap plate mounting methods. These mounting brackets are available with forward-bias, rearward-bias, or dual engine mounting positions that optimize powertrain placement based on user-selected transmission, transfer
Holley Mid-Mount Accessory Drive Systems for Gen III Hemi Engines
The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper.
