You searched for Engine Rebuild - Page 4 of 67 - Engine Builder Magazine
Rebuilding Saturn Engines

In Jan. 7, 1985, Saturn was born when Roger Smith, the President of General Motors, announced the decision to create a whole new car company from the ground up. There were 99 people chosen to create a vision of what GM needed to do in order to prosper in the small car business into the

Rebuilding the Chrysler V6 Engine Family

Much of the information used to write this article was provided by Bruce Chapman, president, and the employees of Ontario Reman, Etobicoke, Ontario, Canada. Ontario Reman is an authorized Chrysler engine rebuilder selling remanufactured engines and small parts to Canadian Chrysler dealers. We thank them! Chrysler introduced a whole new family of 60 degree V6

Rebuilding the Chevrolet LT1 Engine

Although it shared many common dimensions, looked much the same and even had a few common parts, it was totally redesigned to provide more power with lower emissions and better fuel economy.   Compared to the 1991 Chevy 350 L98 with TPI, the LT1 made 20% more horsepower, got better fuel mileage, and had a

Rebuilding Toyota 3.0L V6 Engine

In 1988 Toyota introduced its first V6. Most of the information that follows applies to the 3.0L version used in Toyota’s truck applications. The 3.4L is still fairly new to the aftermarket at this point. 3VZ-E – 3.0L SOHC V6 – ’88-’95 The 3VZ-E was also introduced for the 1988 model year on Toyota 4×4

Rebuilding Hot Rod Honda Engines

Traditionally, hot rodding has been as American as apple pie, baseball, hot dogs and Chevrolet. Certainly, imported vehicles have been "hopped up," but serious hot rodding has always been dominated by enthusiasts who believe that engines have eight cylinders, pushrods and 16 valves. For the past 40 years, machine shops catering to devotees of high

Rebuilding The Chrysler Engine Family

Much of the information used to write thisarticle was provided by Bruce Chapman, president, and the employeesof Ontario Reman, Etobicoke, Ontario, Canada. Ontario Reman isan authorized Chrysler engine rebuilder selling remanufacturedengines and small parts to Canadian Chrysler dealers. We thankthem! Chrysler introduced a whole new family of 60degree V6 engines beginning with the 3.3L OHV

Ensuring Bearing Life: Crankshaft Bearings Are Always Replaced When Rebuilding An Engine

Crankshaft bearings are always replaced when rebuilding an engine because they’re a wear component. Heat, pressure, chemical attack, abrasion and loss of lubrication can all contribute to deterioration of the bearings. Consequently, when an engine is rebuilt new bearings are always installed. “Reading” the old bearings can reveal a great deal about conditions that may

First-of-its-Kind Compound-Turbo L5P Duramax Engine

While incredibly rewarding, nothing about this L5P Duramax build was easy for Lead Foot Diesel Performance – everything was custom or a first. From the billet crank to the one-off compound turbos, this L5P Duramax is impressive. Check it out!

L5P Duramax engine
Silver Seal Stainless Steel Engine Oiler

It features a larger capacity 2-gallon stainless steel tank and large easy-to-fill cap.

engine oiler
Rottler Report with Jeff Gunther of Gunther’s Machine & Rebuilding

Jeff Gunther of Gunther’s Machine & Rebuilding recently got a new Rottler SG9MTS.

Compound Turbo VP44 5.9L Cummins Engine

Cole Sojka’s diesel truck journey began at the age of 16 when he bought a 2001 Dodge Ram 2500 as a farm truck. Over the past eight years and 100,000 additional miles, he’s transformed the truck, including building up the 5.9L VP44 compound-turbo Cummins engine. Check out the build!

Cummins engine
Single-Turbo 5.9L Cummins Engine

Aaron West has done a few smaller scale builds to date, but he recently finished up a “Frankenstein” truck that is pretty impressive. The body is a 1990 Dodge D150, while the chassis is from a shortened 2003 Dodge 2500 4WD, and the engine is a turbocharged 5.9L Cummins. It’s our Diesel of the Week!

Dodge truck and 5.9L Cummins engine
America’s Best Engine Shops 2023 | 955 Automotive

Operating out of roughly 3,500 sq.-ft. of space, 955 Automotive can handle anything that comes in the door, but the focus is on automotive restoration jobs and circle track engine work.

Rebuilt 4B Cummins Engine

R&R Engine and Machine is a quality engine rebuilding shop right in our backyard of Akron, OH! They work on all kinds of engine platforms, but Cummins is one of their specialities. They recently rebuilt this 4B Cummins that came out of a wood chipper.

The CNC Landscape Continues to Grow Inside Engine Shops

Several manufacturers named automation as one of the biggest continuing trends surrounding CNC equipment these days, and it’s clearly a key contributor to a CNC machine’s ability to do more without human interference.

Turbocharged 6.7L Cummins Engine

Austin Ouellette is a true diesel head who’s worked as a field technician for years on various vehicles. Being too busy with work, he enlisted Sin City Diesel & Off-Road to build him a standout 6.7L Cummins engine… and they delivered. Check it out!

Clay Millican’s 12,000-HP Top Fuel Hemi Engine

During a visit to Pro Motor Engines in Mooresville, NC, we were fortunate to line up our time at the engine shop while one of Clay Millican’s Top Fuel Hemi engines was in for machine work and a rebuild. PME Owner Dennis Borem walked us through the details of this 12,000 HP Top Fuel engine

Ford 2.3L Duratec Engine

Poteat’s Engine Rebuilding is a shop that doesn’t shy away from any kind of engine work – gas or diesel. When a customer asked to have a Ford 2.3L Duratec short block built, the answer was an easy yes. Check out this stout little four cylinder!

5.3L LS Engine

Tony Paladino’s shop, Concord Engines, has been serving the Kannapolis, NC area with engine rebuilding and machining services since 2014. One engine platform they specialize in is the LS, and it is offered in three different power levels and configurations. Check it out!.

448 cid Billet LS Engine

Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!