MAHLE Motorsport Introduces New Small Block Chevy Dish PowerPak Piston Set
MAHLE Motorsport’s SBC Dish PowerPak pistons are available either in a 2618 alloy or 4032 alloy, the kit comes complete with a 1.0, 1.0, 2.0mm file fit performance ring set, pins, and clips.
MAHLE Motorsport Introduces LS 5.3L (GEN 4) Flat Top Drop-in Forged PowerPak Piston Set
MAHLE Motorsport now offers drop-in replacement pistons designed for use with the factory Gen 4, i.e. 2005+ rotating assembly that minimizes machine work and maximizes reliability and performance for stock bottom end 5.3L LS engines.
Kelford LS Performance Cams
All Kelford camshafts are made using three-bolt cores, however, a single-bolt cam can be requested. Custom camshafts are also available.
7.1L Twin-Turbo Duramax Engine
Sterling Diesel Performance is showing off its stunning, fully restored 1972 Chevrolet C10 at the 2022 SEMA Show. Under the hood is a 7.1L Duramax engine with a unique twin-turbo setup. Check it out!
Erson Cams Pushrods
Erson Cams, which produces top quality camshafts for all types of racing, has released new performance pushrods. The purshrods are manufactured from 4130 aircraft quality seamless chrome moly, have centerless ground and fully hard turned 210° radius ends, and are black oxide coated. They have a through hardened and carburized tube with greater than 58
Bullet Racing Cams Ultra Series Roller Tappet Lifters
Ultra Series roller tappet lifters are designed for both serious racers and big block Chevy engines.
Developing a Honda 2.3L Engine for Road Racing
One of the most important aspects of engine building has nothing to do with the engine at all. You have to understand the customer and what they are trying to achieve.
Isky Mega Racing Cams
Mega Racing Cams are available in a large variety of specs and dimensions to suit what you’re looking for.
Erson Cams/Erson Road Rage Cams
Erson camshafts are ground on premium quality and feature superior straightness, profile accuracy, surface finish and base circle runout.
Perfect Timing: The Nuances of Timing Components
Because modern vehicles have so many electronics to control the engine with crank and camshaft timing sensors, engine builders need to make sure the alignment of the timing chain is “dead-on.”
Retrofit Hydraulic Roller Lifters
Bullet Racing Cams announces the arrival of its new Retrofit Hydraulic Roller Lifters.
F1-Powered Mercedes-AMG One Debuts
The all-wheel-drive hypercar is road-legal and reaches 124 mph in 7 seconds.
Shop Solutions May 2022
Check out these Shop Solutions from builders across the country!
Naturally Aspirated 709 cid All-Billet Hemi Engine
James “Doc” McEntire’s 1968 Chevy Camaro nicknamed “See Red” features a 709 cubic inch all-billet Hemi engine built by Goodwin Competition, which competes in the naturally aspirated class of drag-and-drive events across the country. It’s a naturally aspirated car in a power adder world, but that’s not stopping Doc from his winning ways. Check out this awesome engine!
Manley Performance Toyota Tundra Valve Spring Kit
With enthusiasts seeking to amp up the power in their Toyota Tundra pickups, Manley Performance has responded with a special valve spring kit for the DOHC 5.7L 3UR-FE V-8 engine. This engine is also employed in Toyota Sequoia, Land Cruiser and Lexus LX 570 applications.
LS Valvetrains: Take Something Good and Make it Better
I’m not sure anyone ever complained about the performance of a Gen III or Gen IV small block Chevy as they came from the factory. Let’s face it, they run good and some of them are downright wicked. But, thanks to engine builders and aftermarket performance parts, there’s always a way to make them run
BMW Confirms End to V12 Production for Series Production Road Vehicles
BMW has revealed that it will produce the very last V12 engine to be fitted to a BMW series production road vehicle in June 2022. To mark the occasion, BMW will offer The Final V12, a limited series of 12 vehicles for customers in the USA. Based on the BMW M760i xDrive, these will be
Twin Supercharged 426 Hemi Engine
We caught up with Mike Copeland of Arrington Performance during the 2021 PRI show where he told us all about his new twin supercharged 426 Hemi build capable of 1,500 hp! Check it out.
Elgin Releases 2022 PRO-STOCK Performance Catalog
Elgin continues to expand its coverage of GM LS Gen III, IV and V engines, with available parts including camshafts, lifters, pushrods, rocker arms, head bolts, connecting rod bolts, main bearing cap bolts, oil pumps, timing chain sets, top-end kits, valves, valve springs, valve spring retainers, and more.
Off-Road Race Engines
As the off-road racing community and technology grew, so did the vehicle speeds and related suspension components. Today, these are without a doubt one of the most highly strained engines in motorsports – bar none.