You searched for Dry Sump - Page 5 of 16 - Engine Builder Magazine
Twin-Turbo 427 cid LS Next Engine

Hoping to run low-7s or even sub-6.50s, Stefan Rossi’s Sick Week changed on his very first run. Despite a crash, Stefan was unscathed and he and his team finished the week. The car features a twin-turbo 427 LS Next engine built by Stefan at his engine shop, ACE Racing Engines. Check it out!

Hilborn 3.00-Inch Bore Big Block Chevrolet Intake Manifold

The Hilborn EFI-R injector manifold kits combine the technology of electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. The engine valley covers are sold separate to allow the customer to choose the correct valley cover kit based on the engine deck height Features: Hilborn high-quality heat-treated aluminum valley

Shawn Fink’s Twin-Turbo 526 cid Hemi Engine

Originally an engine that Jeg Coughlin used in 2005 for his Pro Mod program, this 526 cid Hemi engine was built by Sonny’s Racing Engines and now has a home in Shawn Fink’s 1955 Chevy 210 Belair. With twin 94mm turbos, this high-horsepower Hemi-style engine competes in drag-and-drive events. Check it out!

Naturally Aspirated 709 cid All-Billet Hemi Engine

James “Doc” McEntire’s 1968 Chevy Camaro nicknamed “See Red” features a 709 cubic inch all-billet Hemi engine built by Goodwin Competition, which competes in the naturally aspirated class of drag-and-drive events across the country. It’s a naturally aspirated car in a power adder world, but that’s not stopping Doc from his winning ways. Check out this awesome engine!

The World of Off-Road Race Engines

While there’s no concrete formula for building a quality off-road race engine, some shops follow individual steps that help them to craft the perfect engine for the customer.

Off-Road Race Engines
Alex Taylor’s Twin-Turbo 512 cid Big Block Chevy Engine

For the past 12 months, Alex Taylor has been on a quest for the 6s. To do so, Alex and her dad Dennis built up a 1955 Chevy 210 with this twin-turbo 512 cubic inch big block Chevy engine. We caught up with Alex at Sick Week to talk about the set up. Check it out!

Climate Change’s Mechanical Injected 12-Valve Triple Turbo 6.7L Cummins Engine

Do you believe in Climate Change? Regardless of your scientific standpoint, we can all agree that this 2000 Dodge Dakota Pro Mod truck named Climate Change featuring a mechanical injected 12-valve triple turbo 6.7L Cummins engine is absolutely awesome! The guys at Warren County Diesel and Scheid Diesel are aiming to make this the fastest diesel truck on Earth.

Noonan’s 4.8″ Billet Hemi Engine

During the 2021 PRI show, we got the chance to catch up with the folks at Noonan Race Engineering to chat about one of the shop’s best-selling engine combinations – a 4.8″ billet Hemi engine – which can be used in applications such as NHRA Pro Mod, Top Alcohol, Outlaw Pro Mod, and Tractor Pulling to the tune of 3,000+ horsepower. Find out what went into this billet build.

PRI Honors Top Products at 2021 Trade Show

The motorsports industry’s best and brightest products were honored at the 33rd annual Performance Racing Industry (PRI) Trade Show in Indianapolis earlier this month. In all, nearly 30 exceptional parts and accessories were recognized by a panel of 12 judges representing traditional and new media, as well as sanctioning bodies and race tracks, from more

Supercharged 427 cid LS7 Drift Engine

With just 200 examples here in the U.S., the Nissan Skyline R34 is arguably one of the more desirable sports cars out there. Yufeng Luo of Y Motorsport used it to build a professional drift car complete with a supercharged and nitrous-boosted LS7 engine built by Ken Duttweiler.

Offshore Boat Engines

While not impossible to build, offshore marine engines are not the easiest to build either, so it takes a skilled and experienced engine builder to churn out the power levels most customers desire.

Race Boat
Dirt Late Model Engines

The small blocks are preferred over the big blocks in dirt racing because of their lighter weight for better handling through the turns. In this type of racing, the way your car drives through the corners is way more important than horsepower down the straights.

Dirt Engine
635 cid Big Block Chevy NA Engine

You’ve probably seen his work in a number of movies, TV shows, music videos, and more. Sammy Maloof is an engine builder and racer who has also built a career as a Hollywood stunt man. He’s one talented guy, so when customers come to him wanting big cubic inch engines built, Sammy makes sure to deliver, as he did with this 635 cu. in. big block Chevy engine for a drag race customer.

Triple-Turbo Billet 5.9L 12-Valve Cummins Engine

Sick and tired of increasing horsepower only to have another cast iron block blow up, Richard Mead of RPS Diesel, went looking for a solution. He helped design a billet 5.9L block that would do the trick, and built this triple turbo billet 5.9L 12-valve Cummins engine, which is one of the fastest diesels in the Northern Hemisphere.

Moroso Two-Stage External Oil Pump

This pump gives users the option of scavenging oil from the oil pan with one stage and using the second stage to scavenge oil from turbos or superchargers and areas that require oil to be scavenged.

Moroso Oil Pump
3,000-HP Twin-Turbo 427 cid LS Engine

Stefan Rossi of ACE Racing Engines recently took a month off from building customer engines in an effort to focus on rebuilding his 1966 Chevy Nova SS drag car equipped with a twin-turbo 427 LS engine to compete at Drag Week. He didn’t end up making it to Michigan this year, but he still wound up with a 3,000+ hp LS build. Check it out!

Howell Engine Developments Inc. Founder Billy Haegen Howell Dies

Automotive pioneer and industry legend, Billy “Bill” Haegen Howell, passed away on July 22, 2021 after a battle with ALS, aka Lou Gehrig’s disease. Recognized as a leader in the development of Chevrolet performance engines and electronic fuel injection, Howell’s career with Chevrolet spanned from 1961-1987. While at Chevrolet, he became one of the core

582 cid SR20 Nitrous Jet Boat Engine

This 582 cid SR20 nitrous jet boat engine was built by Mike Miller of Mike Miller Racing Engines for all-out, max-effort racing. The 1,700-horsepower capable engine is one of Miller’s best nitrous combinations yet. Find out why!

ASCS 360 Sprint Car Engine

Salina Engine located in Salina, KS is a shop strictly focused on racing engines. Its primary market is Sprint Car engines, but it also works on Dirt Modified, Dirt Late Model, Dirt Stock Car, and NHRA Super Class engines. Many people familiar with Salina Engine can identify the shop’s work due to its signature look

Radial Motion’s 3-Cylinder Compact Radial Engine

Radial Motion’s three-cylinder compact radial engine is a four-stroke gas engine in a 120° radial configuration. Lightweight and compact, the 2.0L and 2.1L engines deliver both performance and reliability with unique visual appeal and an emotive exhaust note. The engine is capable of withstanding high cylinder pressures, making it well suited for turbocharging and supercharging. Check it out!