You searched for carburetor - Page 5 of 26 - Engine Builder Magazine
632 Big Block Chevy Nitrous Engine

Looking to run 5.75-5.80 in the High 5 class of the 2022 Builder’s Brawl, Mike McCoy showed up with his 1966 Chevy II Nova and a BluePrint Engines 632 big block Chevy nitrous engine under the hood. Check it out!

Steve Morris’ ‘All the Freedom’ 555 cid Big Block Chevy Engine

Not everyone can use a 3,000 horsepower build or has a need for a great big turbocharged or ProCharged engine with EFI, so Steve Morris Engines wanted to create an engine package suitable for everyone that could be dropped into any vehicle. Introducing the ‘All the Freedom’ 555 cid big block Chevy.

Tips and Techniques from Lucas Oil to Keep Vehicles and More Protected During the Cold

Supercars, motorcycles, hot rods and even riding lawn mowers all have engine oil systems, fuel systems, transmissions and other components that require winter prep.

Lucas Oil Tips
541 cid Chrysler Engine

Amongst a sea of colorful and powerful streetcars and hot rods at the Midwest Drags, Bob Larson’s “Prospector,” a 1938 Dodge coupe stood out. Under the hood is a 541 cubic inch Chrysler engine, making this coupe sound just as good as it looks. Check it out!

496 cid Big Block Chevy Engine

Mark Fisher has one badass ’32 Ford pickup. The hot rod has won twice at Drag Week and now twice at the Summit Midwest Drags, which is thanks to an 800+ horsepower Big Block Chevy engine. Check it out!

Building a 6.0L LS Engine

What’s more legendary than the LS engine? With over 20 years in production, the LS has become the chosen V8 for many an engine builder. This article dives into what you’ll need consider when building a high-performance 6.0L LS engine.

6.0L LS engine
Weiand Supercharged 454 Big Block Chevy Engine

For people like Jason Schaefer, making horsepower and enjoying performance is more about being the right mechanic than having the right billfold. He showcases that mentality in his 1929 Ford hot rod, which is equipped with a supercharged 454 big block Chevy engine. Find out what helps this thing rip down the track!

Blown 414 cid Small Block Chevy Engine

Jeremy Bonnett is no stranger to the drag-and-drive scene. He’s been at it for a number of years. Those familiar will surely recognize his 1929 Pontiac featuring a blown 414 cubic inch small block Chevy. Check it out in our newest Engine of the Week!

Naturally Aspirated 709 cid All-Billet Hemi Engine

James “Doc” McEntire’s 1968 Chevy Camaro nicknamed “See Red” features a 709 cubic inch all-billet Hemi engine built by Goodwin Competition, which competes in the naturally aspirated class of drag-and-drive events across the country. It’s a naturally aspirated car in a power adder world, but that’s not stopping Doc from his winning ways. Check out this awesome engine!

Pure Stock Muscle Car Drag Racing

We may never know if the chicken or the egg came first, but we do know the car was here before the drag race, though not by much. It didn’t take long before early cars were lining up, side-by-side, and drag racing became a thing. Ford’s flathead V8 came next, and the decade of the

Pure Stock Muscle Car
702 Big Block Chevy Boat Engine

Looking to replace a 632 blower engine and get more efficient horsepower in a boat application, Rich Franzman got to work building a normally aspirated 702 cubic inch big block Chevy. See what went into the new build!

355 Small Block Chevy Demolition Derby Engine

If you aren’t familiar, there’s a lot more to a demolition derby than most people might think. There’s also a lot more to the engines in these high-dollar competitions than you might think. Just check out this Baldwin Racing Engines-built 355 small block Chevy! It can run with no water for an hour!

Nominations Open for 2022 SEMA Hall of Fame

Induction to the Hall of Fame is the most prestigious award presented to an individual by the association and honors the pioneers who have contributed to the growth of the automotive aftermarket over a long period of time.

598 cid Big Block Chevy Triple Carb Drag Engine

Despite countless other high-horsepower engines at the 2021 PRI Show, when we walked past this 598 big block Chevy engine built by M&M Race Cars & Competition Engines, we had to do a triple take. This head turner features a triple carburetor setup sitting on top of a 14-71 blower and was built for a Top Dragster application. Check it out!

428 Ford FE Stroker

After finding suspicious workmanship on this Ford FE Stroker done at a shop in America, Chris Morus of Elite Engine Building in Victoria, Australia was given the engine to do the job right. See what went into this FE Stroker build!

Four Cylinder Lycoming O-360-C4P Aircraft Engine

As one of the only aircraft engine shops in the country that does all of its own machine work, assembly work and testing in-house, Airworx Aviation only focuses on the heartbeat of the airplane. The shop recently finished an overhaul on this four cylinder Lycoming O-360-C4P engine for a Piper Super Cub. Check it out!

Off-Road Race Engines

As the off-road racing community and technology grew, so did the vehicle speeds and related suspension components. Today, these are without a doubt one of the most highly strained engines in motorsports – bar none.

Off-Road Engines
Offshore Boat Engines

While not impossible to build, offshore marine engines are not the easiest to build either, so it takes a skilled and experienced engine builder to churn out the power levels most customers desire.

Race Boat
Dirt Late Model Engines

The small blocks are preferred over the big blocks in dirt racing because of their lighter weight for better handling through the turns. In this type of racing, the way your car drives through the corners is way more important than horsepower down the straights.

Dirt Engine
Holley EFI Terminator X Stealth 4500 2×4 Kits and Service Parts

The Terminator X ECU is designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, allowing you to easily convert your 4500 equipped 800+ horsepower dragster or door car!

Holley EFI